18
English
[Network]
System
Language
Information
Playback
Connection Test
Security
IP Setting
Network
BD-Live Connecti
...
General Setting
SETUP Exit
Move cursor key to select menu option
then use “OK ” key to select
To enjoy BD-Live™ bonus contents, set
up the network connection.
Note:
- Ensure that the network cable is properly
connected and the router is switched on.
1. Connect the Blu-ray Disc™ player to
the broadband modem or router.
2. In the Setup menu, select [Network],
then press
.
3. Select [IP Setting] in the menu, then
press OK to select [Auto]. An IP address
is obtained automatically.
If no IP address is obtained, select
[Manual] to input IP Address, Subnet
Mask, Default Gateway, DNS1/DNS2
and press OK to re-connect again to the
network. It will try to obtain the IP
address again.
4. Press RETURN or press OK to exit.
Notes:
- During [Manual] mode, if the number is entered
incorrectly, press
to erase the number.
- A contract with the provider is needed to connect to
the Internet.
- This player does not support automatic detection of
cross-cables. Use the straight (standard) LAN cable.
- Loading BD-Live™ content from the internet may
take some time, depending on the file size and the
speed of the internet connection.
•
[IP Setting]
{Auto}
– Auto obtain network information.
{Manual}
– Manual setup network
information.
•
[Connection Test]
Display Network connection status
information.
•
[BD-Live
Connection]
{Permitted}
– During playback of
BD-Live™ disc, the disc may
automatically download all information
from appointed network.
{Partial Permitted}
– During
playback of BD-Live™ disc, the disc may
automatically download partial of the
information from appointed network.
{Prohibited}
– Disable downloading
information from network.
•
[Information]
Display all Network Information.
Display Setting
1
.
Press SETUP
, [General Setting]
menu
is displayed.
2
.
Press
to select
[Display Setting]
,
then press
.
3
.
Select an option, press
to access.
TV Screen
16:9 Full
Auto
Off
Video Process
Resolution
Color Space YCbCr422
HDMI Deep Color
Display Setting
SETUP Exit
TV
HDMI 1080/24p
Move cursor key to select menu option
then use “OK ” key to select
On
4
.
Press
/
to select a setup option and
press
.
5
.
Select the setting you wish to change
and press OK to confirm.
- Press
to return to the previous
menu.
- Press
SETUP to exit the menu.
[TV]
•
[TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{
16:9 Full
} – For a disc with the aspect
ratio of 4:3, the output video is
stretched into 16:9 full screen.
{
16:9 Normal
} – For a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{
4:3 Pan&Scan
} – For standard TV, it
displays a wide picture on the entire
screen and cuts off the redundant
portions.
{
4:3 Letterbox
} – For standard TV, it
displays a wide picture with two black
borders on the top and bottom of 4:3
screen.
•
[Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{
Auto
} – Select the most suitable
resolution according to the TV.
{
480i/576i
}, {
480p/576p
}, {
720p
},
{
1080i
}, {
1080p
}
– Select a video resolution setting that
is best supported by the TV
.
See TV
