1
E
ng
lis
h
6
Customizing
This. section. describes. the. various. setting.
option.of.this.BD.player..
If.the.setup.option.is.grayed.out,.it.means.
the. setting. cannot. be. changed. at. the.
current.state.
General Setting
1..Press.SETUP.button.on.the.remote.
control.The.Setup.Menu.appears.
System
Screen Saver
On
On
On
More...
More...
Language
Disc Auto Playback
Playback
CEC
Security
Easy Setup
Network
Load Default
... General Setting ...
SETUP
Exit
Move cursor key to select menu option
then use “OK” key to select
2
.
Press
to.select.an.option,.then.press
.to.access.
3
.
Press
/
to.select.a.setup.option.and
press
..
4
.
Select.the.setting.you.wish.to.change
and press OK to confirm.
-
Press
to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.to.
personalize.your.BD.player
.
•
[Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.
On
.}.–.Set.the.screen.saver.active.
after.approximately.10.minutes.with.no.
operation.
-.The.BD.player.will.switch.to.standby.
mode.if.there.is.no.operation.after.the.
screen.saver.is.engaged.for.
approximately.10.minutes.
{.
Off
.}.–.Turn.off.the.screen.saver.
mode..
•
[Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{
On
}.–.The.disc.playback.automatically.
after.loading.
{
Off
}.–.Turn.off.disc.auto.playback.
mode.
•
[CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics Control) protocol. You can
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.connectors.
{
On
}.-.Turns.on.REGZA-LINK.features.
-With.CEC.on,.during.TV.standby.with.
the.BD.player.on,.pressing.SETUP,.PLAY/
PAUSE.will..power.on.the.TV.
{
Off
}.-.Disables.REGZA-LINK.features.
•
[Easy Setup]
Re-configure some settings. It is the same
as "Load Default" of steps 4-8.
Tip:
For setting osd and TV resolution and TV aspect.
•
[Load Default]
Reset.all.settings.of.BD.player.to.initial.
default.state.
-.Follow.the.instruction.on.the.TV.screen.
to confirm the default setting operation.
1..Select.
Load Default
.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK..
Load Default
Cancel
Do you want to load default?
OK
3.It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
30%
Loading default, please wait...
4..TV.will.display.as.follow:
Welcome
OK
Next
to the Toshiba BD Player Setting Wizard.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
5. Press OK, enter language setting.
..Press.OK,.enter.language.setting..
Press
/
to.select.a.language.option.
Choose
Previous
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus
etc.
OK
Next
Français
Español
En
J
lish
