9
10
The way
to place the end of drain hose:
•
• Position
drain hose properly otherwise
water leakage.
Do not
kink protract
the drain hose.
or compress
,
,
• If drain hose is too long, do not force it into washing machine as this will
cause abnormal noises.
the
i
mproper position may
result in
Warning!
water trough
Less than 3m
Less than 15cm
1. Check if the
are properly attached
the cabinet. If not, please rotate them to
their original position and tighten the nuts.
2. Check alignment of the product with a
leveler and do the succeeding steps if
necessary.
3. Loosen the lock nut and
feet
to
4.
rotate the foot
either clockwise or counter clockwise ,
until it closely contacts with the floor.
Assure that the lock is secure and then
alternately press the four top corners of the
machine, to check if the proper adjustment
has been done
.
• The
lock nuts
on all four feet must
be
screwed tightly
against
the
housing.
Levelling the washing machine
Warning!
Lock
nut
foot
Raise
Lower
lock
loosen
right
wrong
INSTALLATION
Drain direction
Left or right style
Picture
Left
Right
