manualshive.com logo in svg

Toshiba A55 S306 - Satellite - Pentium M 1.5 GHz, User Manual

Share
Download
Toshiba A55 S306 - Satellite - Pentium M 1.5 GHz User Manual Download Page 123

123

Mobile Computing

Disposing of used batteries

5.375 x 8.375 ver 2.3

pack is fully discharged. If the battery light LED 
flashes or there is some other warning to indicate a 
low battery, go to step 

4

.

4

Connect the AC adapter to the computer and the 
power cord to a power outlet. The DC-IN or AC 
power-light LED should glow green, and the Battery 
LED should glow amber to indicate that the battery 
pack is being charged. If the DC-IN or AC power-
light indicator does not glow, power is not being 
supplied. Check the connections for the AC adapter 
and power cord.

5

Charge the battery pack until the Battery LED glows 
green. 

❖

If you have extra battery packs, rotate their use.

❖

If you will not be using the system for an extended 
period, more than one month, remove the battery pack.

❖

Disconnect the AC adapter when the battery is fully 
charged. Overcharging makes the battery hot and 
shortens life.

❖

If you are not going to use the computer for more than 
eight hours, disconnect the AC adapter.

❖

Store spare battery packs in a cool dry place out of direct 
sunlight.

Disposing of used batteries 

The life of a battery pack should last for years. When the 
battery pack needs replacing, the main battery light flashes 
amber shortly after you have fully recharged the battery.    

You must discard a battery if it becomes damaged.

Summary of Contents for A55 S306 - Satellite - Pentium M 1.5 GHz



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands