Toshiba 8200 - Tecra - PIII 750 MHz, User Manual

Page: 239 / 300

239
Troubleshooting Guide
Resolving a hardware conflict
If the battery has completely discharged, it will not begin charging
immediately. Leave the AC adapter connected, wait 20 minutes
and see whether the battery is charging.
If the battery icon is glowing after 20 minutes, let the computer
continue charging the battery for at least another 20 minutes
before you turn on the computer.
If the battery icon doesn’t glow after 20 minutes, the battery may
have reached the end of its useful life. Try replacing it.
The battery appears not to power the computer for as long
as it usually does.
If you frequently recharge a partially charged battery, it may not
charge fully. Let the battery discharge completely, then try
charging it again.
Check the power-saving features in Power Saver. Have you added
a device, such as a PC Card or memory module, that takes its
power from the battery? Is your software using the hard disk
more? Is the display power set to turn off automatically? Is the
battery fully charged to begin with? All these conditions affect
how long the charge lasts.
For more information on maximizing battery power, refer to
“Taking care of your battery” on page 125 and “Conserving
power” on page 127 .
Keyboard problems
If, when you type, strange things happen or nothing happens, the
problem may be related to the keyboard itself.
The keyboard produces unexpected characters.
A keypad overlay may be on. If the numlock light or cursor
control mode light is on, press
Fn
and
F10
simultaneously to turn
off the cursor control mode light or
Fn
and
F11
simultaneously to
turn off the numlock light.