Toshiba 8000 series User Manual Download Page 83

Page: 83 / 288

Part I: Getting to Know Your Computer

Using Drives

Using the DVD-ROM or CD-ROM drive

If the DVD-ROM drive is not currently installed in the SelectBay,
follow the instructions in “Swapping SelectBay modules” on
page 37.

HINT: Your DVD-ROM drive is designed to play Region 1
(North America) DVD-ROMs.

Using the DVD-ROM or CD-ROM drive

To insert a disc into the DVD-ROM or CD-ROM drive:

Make sure the activity light is off.

Locating the DVD or CD activity light

With the computer’s power on, locate and press the eject
button on the right side of the computer.

The disc drawer slides partially out of the drive (about one
inch).

DVD/CD activity light

Eject button

Summary of Contents for 8000 series

































































































































































































































































































Search results

Summary of Contents for 8000 series

Reviews:

Related manuals for 8000 series

Brands by name

Popular brands

Toshiba 8000 series, User Manual

Search results

Summary of Contents for 8000 series

Reviews:

Related manuals for 8000 series

Brands by name

Popular brands