Toshiba 8000 series User Manual Download Page 47

Page: 47 / 288

Part I: Getting to Know Your Computer

Using Your Computer in the Office

Using external display devices

Selecting video cables

To connect a device to the composite video out port, you’ll need
an RCA cable. For the best video quality, always use a properly
shielded cable.

HINT: Toshiba recommends using a cable no longer than
20 feet (approximately six meters).

Using a poor quality cable may result in a dull or fuzzy picture,
poor color, ghosting, video noise, or loss of video.

Connecting to the composite video out port

To connect the device:

Turn off the computer.

Connect one end of the RCA cable to the external video
device.

Refer to the documentation provided with the device for the
location of its video in port.

Connecting the RCA cable to the composite video out port

Connect the other end of the RCA cable to the composite
video out port on the back of the computer.

Turn on the external video device.

Summary of Contents for 8000 series

































































































































































































































































































Search results

Summary of Contents for 8000 series

Reviews:

Related manuals for 8000 series

Brands by name

Popular brands

Toshiba 8000 series, User Manual

Search results

Summary of Contents for 8000 series

Reviews:

Related manuals for 8000 series

Brands by name

Popular brands