background image

INSTRUCTION MANUAL

CCD COLOR CAMERA

IK-6210A/IK-6410A

TABLE OF CONTENTS

        IMPORTANT SAFEGUARDS ........................................ 2

1. FEATURES AND DESCRIPTION ................................. 4
2. COMPONENTS ............................................................ 4
3. PART NAMES AND FUNCTIONS ................................ 5
4. CAMERA INSTALLATION ............................................. 6
5. CONNECTIONS AND OPERATIONS .......................... 7
6. LENS ............................................................................ 9
7. LINE-LOCK PHASE ...................................................... 10
8. AUTOMATIC ELECTRONIC SHUTTER (AES) ............. 11
9. BACKLIGHT COMPENSATION (BLC) ......................... 11

10. NOTES ON USE AND INSTALLATION ........................ 12
11. IN CASE OF PROBLEMS ............................................ 12
12. SPECIFICATIONS ........................................................ 13
13. EXTERIOR VIEW ......................................................... 15

Please read this manual thoroughly before use, and keep it handy
for future reference.

Record in space provided below the Model # and
the Serial # as found on the label on the bottom of
this unit.
Model #

Serial #

Retain this information for future reference.

00_Cover

06.8.7, 11:08 AM

1

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for 6410A - CCTV Camera

















Reviews: