Your TV comes with:
• Remote control and batteries.
• Several documents, including the Resource
Guide, and Standard Limited Warranty
(L5400U only).
• Pedestal stand and hardware.
• All other cables and adapters are sold separately.
• If any items are missing or damaged, notify
your dealer immediately.
• For the United States, the Standard Limited
Warranty is located at
support.toshiba.com/warranty
.
• For Canada, the terms and conditions of
the Limited One (1) Year Warranty on Parts and
Labour can be found at
www.toshiba.ca/support
Click on Televisions,
Select Warranty, then Select Standard Warranty
& Service Plans and Select Flat Panel
Television (bilingual).
The Resource Guide contains important safety precautions not included in this
document. Please review completely prior to using this product. Complete
instructions are contained in the User's Guide located on Toshiba's web site at :
For United States: support.toshiba.com
For Canada: www.toshiba.ca/support/ceg
Register Your Toshiba Television
Enhance your ownership experience by taking a few minutes to register your Toshiba product at
register.toshiba.com
(for L5400U
series) or
support.toshiba.ca/warranty/
(for L5400UC series).
Completing product registration allows Toshiba to provide you with
product information updates, special offers and promotions. Failure to complete product registration will not diminish your rights
under the Standard Limited Warranty.
Pedestal Assembly Instructions
To prevent possible electric shock, protect the power
cord from being pinched when attaching the pedestal
stand.
Before beginning pedestal assembly, carefully lay the
front of the LCD Panel face down on a flat, cushioned
surface such as a quilt or blanket. Leave the bottom of the
unit protruding over the edge of the surface and assemble
pedestal as indicated below.
Two people are required for installation to avoid injury or
damage to the TV.
Extreme care should always be used when attaching the
pedestal stand to avoid damage to the LCD panel.
For safety information, please review the User’s Guide online:
For United States: support.toshiba.com
For Canada: www.toshiba.ca/support/ceg
QUICK START
Check the components
Unpack the box
1. Remove the components and TV from
the box. Save the packing materials in
case you need them later.
2. Remove the documentation for
important information.
A High-Definition signal is needed to receive a High-Definition picture.
Once you have a High-Definition signal you need to connect it to a
High-Definition input on your TV. Not all channels are currently
broadcasting in HD. Standard analog TV channels and HD channels, even
on the same network, broadcast on different channels. (Example: ABC
analog may be on channel 4, while ABC-HD may be on channel 104.)
To display your TV using a Wall Bracket:
If you decide to wall mount your LED TV, always use a wall bracket
Listed by an independent laboratory (such as UL, CSA, ETL) that is
appropriate for the size and weight of the TV:
VESA Mounting Pattern
TV Size
Hole Pattern (H x V)
Screw Size
58"
400mm x 400mm
M6
65"
400mm x 400mm
M6
L5400U/UC Series
To display your TV on the included Pedestal Stand:
Observe the following safety precautions:
1. Read and follow the pedestal assembly instructions section in this document.
Before beginning pedestal assembly, carefully lay the TV facedown on a
flat, cushioned surface such as a quilt or blanket. Leave the bottom of the
unit protruding over the edge of the surface and assemble the pedestal as
indicated below.
Extreme care should always be used when attaching or removing the pedestal
stand to avoid damage to the display panel.
2. Assemble the pedestal stand with the hardware provided.
3. After assembling the pedestal, place the TV on a sturdy, level surface that can
support the entire bottom surface of the stand and the weight of the unit.
4. Be sure to secure the TV to a wall stud, pillar, surface, or other immovable structure.
Choosing a location for your LED TV
58/65L5400U (United States model)
58/65L5400UC (Canada model)
Many questions regarding parts, service, and warranties can be answered by visiting the Customer Support Section
of our website:
THANK YOU
If you are experiencing a technical problem or have questions regarding operation, authorized service centers,
warranty or parts, please contact our Customer Support Center at:
Always place the TV on a sturdy, level, stable surface that can support
the entire bottom surface of the stand and the weight of the unit using
the following method:
Secure the TV with a sturdy strap to a wall stud, pillar, or other
immovable structure.
When connecting the strap:
- attach the strap to the TV using the hooks or clips on the back of
the TV.
- make sure the strap is tight, secure, and parallel to the floor.
For L5400U series (United States model):
(800) 631-3811 From Inside the United States
(949) 583-3050 From Outside the United States
For L5400UC series (Canada model):
1-800-268-3404 From within Canada
L5400U series: support.toshiba.com
L5400UC series: www.toshiba.ca/support/ceg
Get detailed product information:
L5400U series: A comprehensive User's Guide for your model
is available at
support.toshiba.com
, as well as up-to-date
product information.
L5400UC series: For up-to-date product information,
visit
www.toshiba.ca/support/ceg
.
For detailed product specifications,
Select Product
, then
select Model
and
select Model Number
.
58” TV
Hook Sturdy strap
(as short as possible)
Two stand screws
(Sample illustration)
VESA Mounting Pattern
•
Subject to Change
.
Product specifications, configurations, prices,
system/component/options availability are all
subject to change without notice.
Notice
58/65L5400U/UC model
58”
65”
58/65L5400U/UC
LEFT x 1
A
C
58/65L5400U/UC
B
RIGHT x 1
58”
65”
E
58/65L5400U/UC
x 4
M5 ; L10mm
x 4
D
58L5400U/UC
x 6
65L5400U/UC
M4 ; L8mm
x 1
C
58/65L5400U/UC
58”
65”
VESA Mounting Pattern
Hook Sturdy strap
(as short as possible)
Two stand screws
(Sample illustration)
65” TV
D
D
D
E
B
Two people are required for installation.
1. Unplug and remove any cables and/or other component connectors
from the rear of the TV.
2. Always use the screws supplied or recommended by the wall mount
manufacturer.
3. Follow the instructions provided with your wall bracket. Before
proceeding, make sure the appropriate bracket(s) are attached to the
wall and the back of the TV as described in the instructions provided
with the wall bracket.
4. After attaching the appropriate bracket(s) to the wall and the back of
the TV, remove the pedestal stand from the TV, as described in this
instruction document.
