Toshiba 5105-S607 User Manual Download Page 261

Page: 261 / 302

261

Hot Keys

Power usage mode

5.375 x 8.375 ver 2.4.0

Power usage mode

This hot key displays the power usage pop-up window and
cycles through the battery save modes.

The power usage modes in the operating system under
battery power are:

Long Life, Normal, and High Power; DVD Playback,
Presentation and Super Long Life

Sample power usage modes

The power usage mode in the Windows

operating system

under AC power is Full Power only.

The properties of each mode are set in the Toshiba Power
Management utility. For more information, see

“Power

Management” on page 197

Summary of Contents for 5105-S607















































































































































































































































































































Search results

Summary of Contents for 5105-S607

Reviews:

Related manuals for 5105-S607

Brands by name

Popular brands

Toshiba 5105-S607, User Manual

Search results

Summary of Contents for 5105-S607

Reviews:

Related manuals for 5105-S607

Brands by name

Popular brands