Toshiba 47VL963G, Service Manual

Page: 17 / 126

This version corresponds to APP SW Version, but the
depiction is different. The naming rule is as follows.
4 Boot Code Version Version information of boot code.
5 APP SW Version Version information of Application SW.
6 FRC SW Version Version information of FRC SW.
7 EEPROM Version Version information of EEPROM data.
Display 1 byte data. (Hex)
8 A/D Adjust PAL A/D adjustment status for PAL signal
OK : A/D adjustment is set correctly.
NG : A/D adjustment is not set correctly.
— : A/D adjustment is not needed because the picture format
is not used.
9 A/D Adjust NTSC A/D adjustment status for NTSC signal
OK : A/D adjustment is set correctly.
NG : A/D adjustment is not set correctly.
— : A/D adjustment is not needed because the picture format
is not used.
10 A/D Adjust COMP A/D adjustment status for Component input
OK : A/D adjustment is set correctly.
NG : A/D adjustment is not set correctly.
— : A/D adjustment is not needed because the picture format
is not used.
11 A/D Adjust RGB A/D adjustment status for SCART and PC input
OK : A/D adjustment is set correctly.
NG : A/D adjustment is not set correctly.
— : A/D adjustment is not needed because the picture format
is not used.
12 POT (Power On Time) Total time the TV has been powered on. (Unit: Hours)
(Decimal)
Stand by mode (AC is on, but Panel is off) is not included.
The value is reset to 0 only when receiving the ship out code.
After power on, count up when 1 hour passed.
No need to memory the 0-59 minutes.
13 AST (AC Supply time) Total time the TV has been plugged in. (Unit: Hours) (Decimal)
Stand by mode (AC is on, but Panel is off) is included.
Others are same as POT
PVR