Toshiba 43VJ33P, Service Manual

Page: 10 / 78

– 8 –
GENERAL ADJUSTMENTS
SPECIFIC INFORMATIONS
LOCATION OF SCREEN AND FOCUS VR'S
To remove the Speaker grille and Front panel.
SCREEN VR's
Front panel
Speaker grille
FOCUS VR's
R G
B
REPLACEMENT OF HIGH VOLTAGE CABLE
ANODE LEAD
RUBBER BOOT
LEAD HOLDER
Z450 TPA5007
Fig. a
1. When replacing Anode Lead or Anode Cap with new
one, remove Lead Holder from old lead as shown in
figure below, and put it on new lead. Do not throw away
Lead Holder.
NOTE : THE LEAD HOLDER IS ATTACHED TO
TPA5007 (Z450), BUT IS NOT ATTACHED TO
ANODE LEAD AND ANODE CAP. RUBBER
BOOT IS ATTACHED TO ANODE LEAD AND
ANODE CAP.
2. Detaching Lead Holder
RUBBER BOOT
OLD
ANODE LEAD
or
ANODE CAP
LOCK LEAD HOLDER Cut here rubber boot
and lead together to
detach Lead Holder.
Fig. b