Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V
’s
F
eatur
es
Appendix
Index
20
Learning about the remote control
Only the buttons that are used to operate the TV set are described
here.
POWER
turns the TV on or off
SLEEP
sets the TV to turn off at a specific time (page 42)
LIGHT
The initial press of the LIGHT button causes two actions:
1) enables the illumination mode
2) illuminates the keypad.
Subsequent presses of the LIGHT button cause the Illumination
mode to toggle between enabled and disabled. Any keypress
illuminates the keypad for 5 seconds.
If in programming mode, the keypad will remain lit for 10
seconds.
When disabled, pressing the LIGHT button enables the
illumination mode and lights the keypad.
Channel Numbers (0-9, 100)
allow direct access to channels (page 24)
MODE
cycles through the 6 device modes (TV, CABLE/SAT, VCR,
DVD, AUDIO1, AUDIO2). The mode indicator will be turned
off if the remote control has been left idle for more than 10
seconds.
FAVORITE
allows access to Multi-Window function (page 31)
INFO
allows access to Multi-Window function (page 31)
MENU
allows access to programming (page 21)
ENTER
sets programming menu information (page 21)
yz
x
•
selects or adjusts programming menus (page 21)
(FAV)
x
•
selects your favorite channels (page 26)
Volume
yz
adjusts the volume level
EXIT
exits programming menus (page 21)
Channel
yz
cycles through programmed channels (page 24)
CH RTN
returns to the last viewed channel (page 26)
RECALL
displays on-screen information(page 48)
MUTE
mutes the sound (page 43)
INPUT
selects video input source (page 40)
PIP
allows access to PIP functions (page 29)
PIP
turns the PIP on or off
PIP CH
yz
selects the PIP channels
MULTI
allows access to Multi-Window function
STILL
freezes the PIP
SOURCE
selects the PIP source
LOCATE
moves the PIP
SWAP
switches the PIP and main pictures
