– 9 –
RBC-AX31U(W)-E
(White)
RBC-AX31U(WS)-E
(Black)
Type Name :
Receiver unit
Part No. :
Not assigned
NOte :
All maket
Type Name :
WH-H1JE2
Part No. :
43166006
Type Name
: RBC-AX31U(W)-E
Part No.
: Not assigned
Substitution
: NO
Type of Remote
: Wireless
Reference
: NO
Product used
: Light commercial
Note
: All market except North America
: Hand Unit can be supplied separately
Receiver unit
Ceiling panel
P.C.board
(43459011)
Cover
(43462010)
Cable
(43460126)
Sheet
(43461006)
< Hand Unit and Receiver >
RBC-AX31U(W)-E (Except North America)
RBC-AX31U(WS)-E (Except North America)
1
4
5
6
2
3
1
Emergency operation button
2
Signal receiver
Receives signals from the remote controller.
3
LEDs
Any of these LEDs flashes during an error state.
4
Run LED (green)
Lights while the air conditioner is working.
5
Timer LED (green)
Lights while the timer is reserved.
6
Not Ready LED (orange)
• Lights in the heating mode at the beginning of
operation or during defrosting or when the
temperature controller is activated.
• Flashes during an error state.
NOTE:
•
Header/follower switch
Normally, set this switch to “HEADER” to use the
remote controller as a header.
The remote controller can be used together with the
wired remote controller (sold separately).
•
Test run switch
Do not use this switch in normal operation, but use for
service.
•
Address switches
Distinguish transmit signals and receive signals.
• Even if you push , or when remote controller
operation is disabled by the central control or other
means, “pi” is heard 5 times and the button operation
is not accepted.
Signal Receiving Part Name
Example: Start/Stop button
→
