Toshiba 40RV525U - 40" LCD TV, Owner'S Manual

Page: 33 / 64

Chapter 5: Setting up your TV
33
To create and assign a custom label:
Open the
Channel Labeling
window.
Press or to select a channel you want to label.
Press
STX
to highlight
Custom
and press .
The software keyboard will appear.
Repeatedly press the corresponding key on the remote
control to highlight the desired character on the on-screen
software keyboard.
The highlighted character is entered after you either press
a different key, press
X
key, or after a two-second pause.
Repeat steps 4 and 5 until you have entered all desired
text.
When finished, press .
New labels will be added to the list in alphabetical order
and marked with an icon to indicate that they are
custom. Highlight the new custom label and press
to
assign.
Assigned channel labels will be displayed in the banner,
Channel Add/Delete , Channels Block , and Channel
Browser™ .
To delete the custom label:
Open the Channel Labeling window.
Highlight the label to be deleted and press .
Highlight
Yes
from the deletion confirmation window
and press .
Highlight
Done
and press to save changes, and go
back to the
Channel Labeling
window.
1
2
3
4
5
6
7
8
1
2
3
4
S
Setting the HDMI™ audio mode
To set the HDMI audio mode:
Press and open the Audio menu.
Highlight
Audio Setup
and press .
Press
S
or
T
to select
HDMI 1 Audio
and then press
W
or
X
to select the HDMI 1 audio mode ( Auto , Digital ,
or
Analog
). (
Auto
is the recommended mode.) See
“Connecting an HDMI or DVI device to the HDMI
input” (
page 17).
Done
Audio Setup
Language
Reset
o e r e t S S T M
English
Dolby Digital Optical Output Format
HDMI 1 Audio
o N o i d u A C P
Auto
Dynamic Range Control
Compressed
Dolby Digital
Mode Description
Auto
When viewing the HDMI 1 input, if digital
audio from the HDMI input is available,
it will be output. If not, the TV will
automatically detect and output analog
audio from the PC Audio input.
Digital
When viewing the HDMI 1 input, digital
audio from the HDMI input will be output.
Analog
When viewing the HDMI 1 input, analog
audio from the PC Audio input will be
output.
To save your settings, highlight Done and press .
Note: Because the PC and HDMI-1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to “ No ,”
the HDMI 1 Audio setting changes to “ Auto .” If PC Audio is
set to “ Yes ,” the HDMI 1 Audio setting is set to “ Digital ” and
is grayed out in the menu. (Also see item 3 on page 11 and
“Setting the PC Audio” on page 50.)
1
2
3
4