manualshive.com logo in svg

Toshiba 40PW03B, Service Manual

Share
Download
Toshiba 40PW03B Service Manual Download Page 31

– 31 –

GENERAL ADJUSTMENTS

SPECIFIC INFORMATIONS

3-7 Cinema (NTSC mode)

Note: The cursor will move outside the screen limits in the Cinema mode; therefore, be careful to consider the position

of the cursor displayed on the screen when making adjustments.

Note: Please be aware that the Cinema screen convergence pattern center is located at the center of the screen but
the image center is located approximately 13mm above that.

441

220.5

73.5

367.5

441

220.5

73.5

367.5

0

266

228

114

266

114

228

0

3-8 Subtitle (NTSC mode)

Note: The cursor will move outside the screen limits in the Subtitle mode; therefore, be careful to consider the position

of the cursor displayed on the screen when making adjustments.

Note: Please be aware that the Subtitle screen convergence pattern center is located at the center of the screen but
the image center is located approximately 32mm above that.

441

220.5

73.5

367.5

441

220.5

73.5

367.5

0

287

246

123

287

246

123

0

Summary of Contents for 40PW03B








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands