Subject:
Product Engineering Specification
Part No.:
BK.01191.203
Rev.: 4
Doc.
No.:
201-C005
Project Code:
BK.01191.001
Page 5 of 15
Model Name:
B191-203
Form No.:A-01-001-09(111107)
保存期限
:
最新狀態
保存單位
:eGRNSystem
過期處置
:
背面紙
Release Notice
No +5V
+12.5V
LED
Load
+12.5V meet the electrical
specification : 12.5V
±
5%
The measurement output
regulation shall test voltage of
output connects.
1 0.37A
0.0A OFF
2 0.37A
0.0A OFF
3 0.37A
0.0A ON
4 0.37A
0.0A ON
Notes:
Note1 The measured terminal is paralleled with a 10uF Ecap and a 0.1uF Ceramic cap.
Note2 Band Width is limited within 20MHz.
Note3 +12.5V 0A load regulation should follow dynamic item 3.8 and between 0~0.9A
3.4 Power saving (standby mode ) and PS ON / OFF define
Specification Condition
0.27W Max.
With 5.1V/20mA, at
240Vac
PS ON / OFF define
PW ON signal
Test
Specification
Outputs
Status
Active-high 2.5V~5V Enable
Active-low 0V~0.5V Disable
3.5 Turn On Delay Time (Power On Time)
The power supply is in regulation within 2S max. after specified rated input voltage
is applied.
3.6 Hold Up Time
See
4. Time sequence of power on/off
Output voltage
230Vac input
Condition
5V >20ms TV
SET
12V >20ms TV
SET
