Toshiba 39L22U, User Manual

Page: 111 / 131

111
Using the TV’s Advanced Features
Using the advanced picture settings
To select the color temperature:
1 Press the MENU button and open the Picture menu.
2 Highlight Picture Settings , and then press the ENTER button.
3 Highlight Advanced Picture Settings , and then press the
ENTER button.
4 Highlight Color Temperature , and then press the ENTER
button. Use the ( / arrow) buttons to select the mode you
prefer (
Cool , Medium , or Warm ).
5 Press the
(
/ arrow) buttons to select either B Drive or G
Drive , and then press the
(
/ arrow) buttons to adjust the
settings:
❖
B Drive: press the
(
arrow) button to make the picture
blueish.
❖
G Drive: press the
(
arrow) button to make the picture
greenish.
The B Drive and G Drive settings are connected to the Color
Temperature settings and will change based on which setting is
selected in
step 5 above.
6 To save your new settings, highlight Done , and then press the
ENTER button.
To revert to your original settings, highlight Reset , and then
press the ENTER button.
If you select one of the factory-set picture modes (Dynamic,
Standard, Movie, or PC) and then you change the Color Temperature
mode, the picture mode automatically changes to Preference.
CableClear
®
digital Noise Reduction
The CableClear
®
digital Noise Reduction feature allows you to
reduce visible interference in your TV picture. This may be useful
when receiving a broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1 Press the MENU button, and then open the Picture menu.
2 Highlight Noise Reduction , and then press the ENTER
button.
NOTE
NOTE