Toshiba 37AV500P, Service Manual

Page: 45 / 95

Setting Data of Signal Unit
After replacing Main board, the following initialization is required.
Note:
In case initialization by setting wrong PANEL is done, there is a possibility of abnormal
display.
1) Check the picture carefully. If necessary, adjust any adjustment item above.
Perform "Auto tune" on the owner's manual.
Initializing Data setting flowchart after replacing the Signal Unit
CAUTION: Whenever using new Main board to the set, setting the PANEL
data according to Panel option data.
PANEL (HEX) Model name Panel vendor
0x01 or 0x04 32AV500P IPS(old) or IPS(new)
0x02 or 0x05 37AV500P IPS(old) or IPS(new)
0x03 or 0x06 42AV500P LGD(old) or LGD(new)