Print this page
Service Mode
Version Check Mode
1. Press "9" button twice on Remote Control during display of adjustment menu in the Service
Mode.
2. During Version Check, the following displays are shown.
ADJUSTMENT
Item
Explanation/Data Format
1 MAIN MPU
Target name of the microprocessor
2 EEPROM
Version information of EEPROM : Display 1 byte data.
3 OPTION
Option information : Display three numbers of 1 byte data.
4 BL ver
Version information of Boot Loader software.
5 AP ver
Version information of Application software.
6 A/D Adjust
A/D adjustment status.
–COMP : Component input
–PC
: PC input
–NTSC : NTSC (60Hz) SD signal (composite input).
–PAL
: PAL (50Hz) SD signal (composite input)
OK
: A/D adjustment set correctly.
NG
: A/D adjustment set incorrect.
7 Model name
Model name and Panel vendor
SA : SAMSUNG AU : AUO SH : SHARP LG : LGD CM : CMO
