Toshiba 32L310U18, Manual

Page: 56 / 81

56
32L310U18 / 49L510U18 / 55L510U18 32" 720p / 49" 1080p / 55" 1080p 60Hz LED TV
www.tv.toshiba.com
Changing channel settings
This section covers:
• Automatically scanning for channels
• Manually adding channels to the channel list
• Hiding channels
• Setting up the Favorites list
• Tuning to a favorite channel
• Deleting a favorite channel
Automatically scanning for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH

or CH

, your TV goes to the next or previous channel
in the channel list. The channel scan may take several
minutes.
1 Make sure that you have set up the
ANT / CABLE IN jack before programming
channels. See Setting up the ANT / CABLE IN jack
on page 39 .
2 Press MENU , press  or  to highlight
Installation , then press ENTER .
3 Highlight Channel Tuning , then press ENTER .
4 Highlight Auto Tuning , then press ENTER . Press
ENTER again to start the scan. Your TV scans for
available channels. The scan may take several
minutes.
5 When the scan is complete, press EXIT to close the
menu. Your TV tunes to the first scanned channel.
Note
When you scan for channels, your TV
erases any channels already stored in the
channel list.
If a channel is not stored in the channel
list, you can:
• Use the number buttons on the remote
control to enter the channel number.
• Manually add the channel to the
channel list. See Manually adding
channels to the channel list on page 57 .
Notes
• If you created a 4-digit PIN, use the
number buttons to enter your PIN and
start scanning. For more information,
see
Setting a new PIN on page 58 .
• You can press EXIT to stop the auto
channel search, but you will need to
run the auto channel search again to
create a channel list.