54
32L310U18 / 49L510U18 / 55L510U18 32" 720p / 49" 1080p / 55" 1080p 60Hz LED TV
www.tv.toshiba.com
3
Highlight
4:3 Stretch
, then press
ENTER
.
4
Highlight
On
, then press
ENTER
. (To turn off
4:3
Stretch
, select
Off
.)
5
Press
EXIT
to close the menu.
Freezing the picture
You can freeze the picture while you are watching TV.
The audio continues to play while the picture is
frozen. When you unfreeze the picture, the video
resumes playing.
1
When watching the TV, press
FREEZE
.
2
To unfreeze the picture, press
FREEZE
or any other
button.
Adjusting the sound
This section covers:
• Adjusting sound settings
• Playing TV audio only
Adjusting sound settings
You can adjust sound settings to improve the sound
quality.
1
Press
MENU
, press
or
to highlight
Sound
,
then press
ENTER
.
2
Highlight an option, then press
ENTER
. You can
select:
•
Sound Mode
—Selects the sound mode. You
can select
Standard
,
Music
,
Movie
,
Clear Voice
,
or
Enhanced Bass
.
•
Reset
—Resets all sound settings to the factory
default.
•
Balance
—Adjusts the balance between the left
and right audio channels.
•
Bass
—Adjusts the low sounds.
•
Treble
—Adjusts the high sounds.
•
Advanced Sound Settings
—Adjusts advanced
sound settings. You can select:
•
TruSurround
—Delivers clear, crisp, natural
sound over front facing speaker
configurations, complete with rich bass, high
frequency detail, and clear dialog. You can
select
On
or
Off
.
•
Dialog Clarity
—Adjusts the dialog volume
when watching movies or TV programs. You
can select
Off
,
Low
, or
High
.
•
TV Speakers
—Turns your TV’s speakers on or
off. You can select:
•
Auto
—Turns off the TV speakers when you
connect a device to the
/AUDIO OUT
jack.
•
On
—Keeps the TV speakers on when you
connect a device to the
/AUDIO OUT
jack.
•
Off
—Turns off the TV speakers.
•
MTS
—(Analog channels received through the
ANT / CABLE IN
jack only) Selects the audio
mode. You can select:
•
Stereo
—Select this option for programs
broadcast in stereo. You can typically leave
your TV in Stereo mode because
Stereo
outputs the type of sound being broadcast
(stereo or mono).
•
Mono
—Select this option if there is noise or
static on weak stereo broadcasts.
•
SAP
—Select this option to listen to a
secondary audio program, if available. If you
select this option and no secondary audio
program is available, you may not hear
sound. Change the
MTS
option to
Stereo
.
•
Digital Audio Selection
—Lets you
conveniently switch between audio tracks on a
digital channel (when available). This option
temporarily overrides the
Primary Audio
Language
option on the
Sound
menu.
•
Primary Audio Language
—Selects the
language for digital channels.
Notes
• If your TV is left in freeze mode for
more than 15 minutes, freeze mode
automatically turns off and your TV
returns to normal video.
• Using the freeze function for any
purpose other than your private
viewing may be prohibited under the
Copyright Laws of the United States
and other countries, and may subject
you to civil and criminal liability.
Note
If the Voice Guide is turned on, the
TV
Speakers
option can only be set to
Auto
.