9
English
Aerial cables: - - - - - - - - - - - - - - - - - - -
Connect the aerial to the ANT socket on the rear of the television.
If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to
the television.
SCART cables: - - - -- - - - - - - - - - - - - - -
Connect the video recorder
IN/OUT
or decoder
TV
socket to the television. Connect the media
player
SAT
socket to the decoder
MEDIA REC
. socket.
Before running
Auto Tuning
put your decoder and media recorder to
Standby
.
HDMI
®
(High-De
¿
nition Multimedia Interface) is for use with a DVD, decoder or electrical equipment
with digital audio and video output. It is designed for best performance with 1080i high-de
¿
nition
video signals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also
support VGA, SVGA, XGA, WXGA and SXGA.
NOTE:
Although this television is able to connect to HDMI equipment it is possible that some equip-
ment may not operate correctly.
A wide variety of external equipment can be connected to the back of the television, there-
fore the relevant owner’s manuals for all additional equipment must be referred to.
If the television automatically switches over to monitor external equipment, return to normal televi-
sion by pressing the desired channel button. To recall external equipment, press
to select.
NOTE:
Due to copy protected signal in some DTV programme, non-scrambled content and scram-
bled content with “copy freely (CGMS-A: 00)” are available via SCART analog video and
audio output.
DTV Programme
SCART Analog Output
Scrambled with CGMS-A: 00 (Copy Freely)
Output via SCART
Scrambled with CGMS-A: 01 (Copy No More)
Not output via SCART
Scrambled with CGMS-A: 10 (Copy Once)
Not output via SCART
Scrambled with CGMS-A: 11 (Copy Never)
Not output via SCART
Non- scrambled
Output via SCART
*CGMS-A (Copy Generation Management System-Analog) is a copy protection mechanism for
analog television signals.