FCC Declaration of Conformity
Compliance Statement (Part 15):
Toshiba 32L2200U, and 40L2200U
Television models comply with Part 15 of
the FCC rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
The party responsible for compliance to these
rules is:
Toshiba America Information Systems, Inc.
9740 Irvine Blvd., Irvine, CA 92618.
Phone: 800-631-3811
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by removing and applying power to the
equipment, the user is encouraged to try to
correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Caution: Changes or modifications to this
equipment not expressly approved by
Toshiba could void the user's authority to
operate this equipment.
ENERGY STAR
®
User Information
ENERGY STAR User Information Statement:
the factory default settings of this television
meet ENERGY STAR
®
requirements.
Changing Picture Settings may increase
energy consumption, possibly beyond the
limits required for ENERGY STAR qualification.
To ensure your television is operating at
optimal energy efficiency, select [Home] mode
during initial activation. To return to [Home]
mode settings, select [Standard] picture
mode. [Standard] mode is recommended for
normal home use.
Important notes about your TV
The following symptoms are technical
limitations of LCD Display technology and are
not an indication of malfunction; therefore,
Toshiba is not responsible for perceived
issues resulting from these symptoms.
1) An afterimage (ghost) may appear on the
screen if a fixed, non-moving image
appears for a long period of time. The
afterimage is not permanent and will
disappear in a short period of time.
2) The LCD panel contained in this TV is
manufactured using an extremely high
level of precision technology; however,
ENERGY STAR
®
qualified TV.
Products that earn the ENERGY
STAR prevent green house gas
emissions by meeting strict
guidelines set by the U.S.
Environmental Protection Agency.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks.
there may be an occasional pixel (dot of
light) that does not operate properly (does
not light, remains constantly lit, etc.). This
is a structural property of LCD technology,
is not a sign of malfunction, and is not
covered under your warranty. Such pixels
are not visible when the picture is viewed
from a normal viewing distance.
Note: Interactive video games that involve
shooting a “gun” type of joystick at an
on-screen target may not work with this TV.
Toshiba Support
If you require help or are having problems operating your product,
contact Toshiba at:
Toshiba’s Support Web site: support.toshiba.com.
For technical support, call the Toshiba Customer Support Center:
Within the United States at (800) 631-3811
Outside the United States at (949) 583-3050
Troubleshooting
Refer to the “Troubleshooting” chapter in the online User's Guide at
support.toshiba.com. If you are still having trouble you may need to
contact Toshiba for additional assistance.
For more information, see the “Connecting a DVD player with ColorStream
®
(component video), a VCR, and a satellite receiver” section in the User's Guide.
Trademark Information
• ColorStream is a registered trademark of
Toshiba America Information Systems, Inc.
and/or Toshiba Corporation.
•
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
• Blu-ray Disc™, Blu-ray™, and the logos are
trademarks of the Blu-ray Disc
Association.
•
HDMI, the HDMI Logo, and
High-Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
• All other brand and product names are
trademarks or registered trademarks of
their respective companies.
Copyright
This guide is copyrighted by Toshiba
America Information Systems, Inc. with all
rights reserved. Under the copyright
laws, this guide cannot be reproduced in any
form without the prior written permission of
Toshiba. No patent liability is assumed,
however, with respect to the use of the
information contained herein.
©2012 by Toshiba America Information
Systems, Inc. All rights reserved.
Notice
TOSHIBA CORPORATION AND
TOSHIBA AMERICA INFORMATION
SYSTEMS, INC. (TOSHIBA) PROVIDES
NO WARRANTY WITH REGARD TO
THIS MANUAL OR ANY OTHER
INFORMATION CONTAINED
HEREIN AND HEREBY EXPRESSLY
DISCLAIMS ANY IMPLIED
WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR
PURPOSE WITH REGARD TO ANY OF
THE FOREGOING. TOSHIBA
ASSUMES NO LIABILITY FOR ANY
DAMAGES INCURRED DIRECTLY
OR INDIRECTLY FROM ANY
TECHNICAL OR TYPOGRAPHICAL
ERRORS OR OMISSIONS
CONTAINED HEREIN OR FOR
DISCREPANCIES BETWEEN THE
PRODUCT AND THE MANUAL. IN NO
EVENT SHALL TOSHIBA BE LIABLE
FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, OR
EXEMPLARY DAMAGES, WHETHER
BASED ON TORT, CONTRACT
OR OTHERWISE, ARISING OUT OF
OR IN CONNECTION WITH THIS
MANUAL OR ANY OTHER
INFORMATION CONTAINED
HEREIN OR THE USE THEREOF.
The information contained in this manual,
including but not limited to any product
specifications, is subject to change
without notice.
P
R
R
Y/VIDEO
L/MONO
AUDIO
P
B
P
R
R
Y/VIDEO
L/MONO
AUDIO
P
B
P
R
R
Y/VIDEO
L/MONO
AUDIO
P
B
P
R
R
Y/VIDEO
L/MONO
AUDIO
P
B
Connecting your TV
Connecting an HDMI
®
or DVI device to the HDMI
®
input
(Sample Illustration) DVI connections
(Sample Illustration) Connecting an HDMI
®
device
VIDEO
AUDIO
L
R
R
L
OUT
IN
DVI/HDCP
OUT
IN
TV back panel
HDMI device
Connecting a digital audio system
(Sample Illustration) Connecting a digital audio system
For more information, see the “Connecting a digital audio system” in the User’s Guide.
Connecting a computer
(Sample Illustration) Computer connections
For more information, see the “Connecting a computer” section in the User's Guide.
Dolby
®
Digital decoder or
other digital audio system
TV back panel
For detailed information, see the “Connecting your TV” section in the
User's Guide located at support.toshiba.com.
For more information, see the “Connecting an HDMI
®
or DVI device to the
HDMI
®
input” section in the User's Guide.
PC audio
cable
PC audio
output
Conversion adapter (if necessary)
Computer
TV back panel
Connecting a VCR, antenna, cable TV, or camcorder
For more information, see the “Connecting a VCR, antenna, cable TV,
or camcorder” section in the User's Guide.
Connecting a Blu-ray™/DVD player with ColorStream
®
, satellite receiver, or VCR
ColorStream
®
and composite video cannot be used simultaneously.
IN from ANT
VIDEO
AUDIO
OUT to TV
L
R
R
L
OUT
IN
CH 3
CH 4
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
COMPONENT VIDEO
L
R
Satellite
IN
P
B
P
R
Y
(Sample Illustration) Satellite receiver with component video or
From antenna
Stereo VCR
TV back panel
From
satellite dish
DVD player with component video
(Sample Illustration) Connecting to a VCR, antenna, or cable TV or camcorder
Camcorder
TV back panel
From cable TV
From cable TV
or antenna
Cable box
Stereo VCR
IN
OUT
CH 3
CH 4
IN
from
ANT
VIDEO
AUDIO
OUT
to
TV
L
R
R
L
OUT
IN
CH 3
CH 4
VIDEO
AUDIO
OUT
L
R
Using the Remote
The buttons used for operating the TV are described here. For the
HDMI
®
CEC remote control functions, see the “HDMI
®
CEC playback
device (DVD player, etc.) control” section in the User's Guide.
(Sample Illustration)
Remote control overview
The error message “NOT AVAILABLE” may appear if you press a button for a function
that is not available.
Item: Description:
Function:
1
POWER button
Turns the TV On and Off. When the TV is on, the power LED indicator on the TV front
glows green.
2
PIC SIZE button
Cycles through the picture sizes, see the “Selecting the picture size” section in the
User's Guide.
3
PIC MODE button
Selects the picture mode, see the “Selecting the picture mode” section in the User's Guide.
4
INPUT button
Selects the video input source, see the “Selecting the video input source” section
in the User's Guide.
5
SLEEP button
Accesses the sleep timer, see the “Setting the sleep timer” section in the User’s Guide.
6
FREEZE button
Freezes the picture. Press again to restore the moving picture, see the “Using the FREEZE
feature” section in the User's Guide.
7
Channel Number
buttons (0-9)
8
FAV button
Accesses the Favorites List in the Channel Browser, see the “Favorites browser” section
in the User's Guide.
9
RECALL button
Displays TV status information.
10
CH ( / )
buttons
Cycles through programmed channels.
11
C. CAPTION button
Accesses closed captions, see the “Using closed captions” section in the User's Guide.
12
MUTE button
Reduces or turns off the sound, see the “Muting the sound” section in the User's Guide.
13
VOL (+ / -) buttons
Adjusts the volume level.
14
INFO button
15
EXIT button
Closes on-screen menus.
16
ENTER button
Activates highlighted items in the main menu system.
17
CH RTN button
18
( / / / )
buttons
Selects or adjusts programming menus when a menu is on-screen.
19
( / ) buttons
20
MENU button
Accesses the main TV menu system. See the “Navigating the menu system” section
in the User's Guide.
Directly tunes channels. The 100 button allows you to enter two part channel numbers,
see the “Storing channels in memory (optional)” section, or to edit the Favorites List,
see the “Favorites browser” section in the User's Guide.
Displays TV status information as well as program details,
when available, see the
“Displaying TV information”
section in the User's Guide.
Returns to the last viewed channel or source, see the “Switching between two channels
using Channel Return” section in the User's Guide.
Opens the Channel Browser and tunes to the previous/next channel in the channel
history when TV programming is on-screen. See the “Tuning channels using the
Channel Browser” section in the User's Guide.
21-28 Playback buttons
Controls HDMI
®
CEC compatible devices. See “Learning about the remote control”
section in the User’s Guide.
