background image

56

Specifications

Note:

 

This model complies with the 

specifications listed below.

 

Designs and specifications are subject to 

change without notice.

 

This model may not be compatible with 

features and/or specifications that may be 

added in the future.

Television System

NTSC standard
ATSC standard (8VSB)
Digital Cable (64 QAM, 256 QAM; in-the-clear, 

unencrypted)

Channel Coverage

VHF: 2 through 13
UHF: 14 through 69
Cable TV: 

Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 135)

Power Source:

 120 V AC, 60 Hz

Power Maximum Current

32E200U/32E20U: 1.55 A
37E200U/37E20U: 1.75 A
40E200U/40E20U: 2.20 A

Power Consumption

32E200U/32E20U: 0.6 W in standby mode
37E200U/37E20U: 0.6 W in standby mode
40E200U/40E20U: 0.6 W in standby mode

Audio Power: 

32E200U/32E20U: 10 W + 10 W
37E200U/37E20U: 10 W + 10 W
40E200U/40E20U: 10 W + 10 W

Speaker Type: 

Two 1-5/8 ×

 

6

 

inches

 

(4 × 15.2

 

cm)

Video/Audio Terminals

VIDEO/AUDIO INPUT:

VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation 

equivalent, 22 k ohm or greater)

ColorStream

®

 (component video) HD INPUT:

VIDEO:    Y: 1V(p-p), 75 ohm 

PR: 0.7 V(p-p), 75 ohm 
PB: 0.7 V(p-p), 75 ohm 
Suggested formats: 1080i, 720p, 
480p, 480i

AUDIO:   150 mV(rms), 22 k ohm or greater

HDMI

®

 INPUT:

HDMI compliant (type A connector)
HDCP compliant
Suggested formats: See table on the next page.
HDMI Audio: 2-channel Linear-PCM;  

      32/44.1/48 kHz 
      sampling frequency; 16/20/24  
      bits per sample

DIGITAL AUDIO OUTPUT:

Optical type

PC INPUT:

15-Pin D-sub Analog RGB

Dimensions

32E200U/32E20U:

Width: 2’7-1/2 inches (801.68mm)
Height: 1’10-3/4 inches (577.05mm)
Depth: 9-5/8 inches (245mm)

37E200U/37E20U:

Width: 3’-3/8 inches (924.5mm)
Height: 2’2 inches (660.3mm)
Depth: 11-5/8 inches (295mm)

40E200U/40E20U:

Width: 3’3-1/8 inches (993.7mm)
Height: 2’3-3/8 inches (694.8mm)
Depth: 11-5/8 inches (295mm)

Mass (Weight)

32E200U/32E20U:

 

24.3 lbs (11.0 kg)

37E200U/37E20U:

 

29.8 lbs (13.5 kg)

40E200U/40E20U:

 

32.0 lbs (14.5 kg)

Operating conditions

Temperature: 32ºF - 95ºF (0ºC - 35ºC)
Humidity: 20 - 80% (no moisture condensation)

Supplied Accessories

• 

Remote control with two size “AAA” batteries

• 

Owner’s manual (this book)

Chapter 9: Appendix

Summary of Contents for 32E200U































































Reviews: