18
Introduction
TV front and side panel controls and connections
TV front and side panel controls and connections
(Sample Illustration) Front and side panel controls and connections
1
Remote sensor (embedded)
—Point the remote control toward
this remote sensor.
2
Power On LED
—Power indicator, (glows green when the TV
power is On).
3
Brightness sensor
—This sensor will detect the ambient light
conditions to optimize the backlighting levels.
4
POWER
—Turns the TV
On
and
Off
. If the TV stops
responding to the buttons on the remote control or TV control
panel and you cannot turn off the TV, press and hold the
POWER
button on the TV control panel for a few seconds to
reset the TV.
5
CHANNEL
—When no menu is on-screen, these buttons
change the channel (programmed channels only, see
channels in memory (optional)” on page 46
).
6
VOLUME buttons
—When no menu is on-screen, these
buttons adjust the volume level.
7
MENU (ENTER)
—Accesses the on-screen menus. When a
menu is displayed, this button also functions as the ENTER
button.
8
INPUT
—Changes the source you are viewing. Press
repeatedly to change from one source to the next.
9
Arrow buttons
(
+ -
)
—When a menu is on-screen,
these buttons function as up/down/left/right menu navigation
buttons.
10
EXIT
—Instantly closes an on-screen menu.
1
2 3
4
10
9
7
8
5
6
11
Left side panel
TV front
TV top
