- 15 -
English
Initial Installation
Before switching on the television put your decoder and media recorder to
Standby
if they are connected
and ensure the aerial is connected to your television. To set up the television use the buttons on the remote
control as detailed on
page 9
.
MPORTANT: Ensure that the aerial is connected and
a Common Interface module is not inserted before
switching on the TV for the first time installation.
1.
Connect the mains plug and switch the TV to on
using the
button
. If the TV does not switch on,
press any numbered or button on the remote
control, then the language selection menu will
be displayed. This screen will appear the first
time that the TV is switched on and each time
the TV is reset.
2.
By pressing
Up
or
Down
button, highlight the
language you want to set and press
OK
button.
The following message will be displayed next:
3.
By pressing
Left
or
Right
button, select the
country
you want to set and press
Down
button
to highlight the
Search Type
option. Use
Left
or
Right
to set the desired search type. Available
search types are Digital and analog, digital only
and analog only.
4.
When set,
Down
buton to select Teletext
Language. Use
Left
or
Right
button to select
desired Teletext Language.
5.
Press
Down
button after setting Teletext Language
option.
Scan Encrypted
will be then highlighted.
You can set
Scan Encrypted
as
Yes
if you want
to scan coded stations.
6.
Press
OK
button on the remote control to continue
and the following message will be displayed on
the screen:
7.
Select
Yes
button by using
Left
or
Right
button
and press
OK
button to continue.
8.
The Auto tuning screen will appear and the television
will start to search for available stations. The
progress bar will move along the line. You must
allow the television to complete the search. The
following OSD will be displayed on the screen and
the television will search for the selected broadcasts:
Note
:
You can press
MENU button to cancel.
•
After the available stations are stored, Channel List
will be displayed on the screen. If you like the sort
channels, according to the LCN, please select
Yes
and then press
OK
button
(if available).
Note:
LCN = Local Channel Number used for channel
sorting”.
•
Press
OK
button to quit channel list and watch TV.
Note: Do not turn off the TV while initializing first time
installation.
