background image

24

Using the T

V’s

F

eatur

es

Note:

After programming CHANNEL BLOCK, tune
the TV to a channel that is not blocked before
turning off the TV.

Caution:

Blocking unrated television programs
(those rated “TV NONE”) may block
emergency messages.

7. Press 

x

 or 

 to highlight “Y,” which enables all blocking by

activating the V-Chip. (Note:  Highlight “N” to deactivate the
V-Chip feature and disable blocking.)

8. Press 

y

 or 

z

 to highlight SET BLOCKING OPTIONS.

9. Press 

x

 or 

 to display the unrated movie/program blocking menu.

10. Press 

y

 or 

z

 to highlight either BLOCK MPAA UNRATED (to

block unrated movies) or BLOCK TV NONE RATING (to block
unrated TV programs).

11. Press 

x

 or 

 to highlight “Y” to block unrated movies/programs.

(Note: Highlight “N” to unblock unrated movies/programs.)

12. Press 

EXIT 

to return to normal TV viewing.

MOVE

[       ]

[       ]

ENABLE BLOCKING     [Y] N
SET RATING

SET BLOCKING OPTIONS

NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK              OFF
 

SET UP

SELECT

MOVE

[       ]

[       ]

BLOCK MPAA UNRATED:

[Y ]

 

N

BLOCK TV NONE RATING:

[Y]

 

N

BACK TO V-CHIP MENU

SET UP

SELECT

NOTICE: ENABLING THIS OPTION

MAY BLOCK EMERGENCY
MESSAGES

Blocking channels

You can block a maximum of four TV channels and four cable
channels. Blocked channels cannot be viewed, regardless of their
programs’ ratings. If you try to tune the TV to a blocked channel,
the nearest unblocked channel will display.
To block a channel:

1. Tune the TV to the channel you want to block.
2. Press 

MENU

.

3. Press 

x

 or 

 to highlight the SET UP menu.

4. Press 

y

 or 

z

 to highlight V-CHIP CONTROL.

5. Press 

x

 or 

 to display the Enter PIN Code screen.

6. Use the 

CHANNEL NUMBERS 

(0–9) to enter your four-digit

PIN code. After entering the code, the V-Chip Control menu
appears.

7. Press 

y

 or 

z

 

to highlight BLOCK CHANNEL.

8. Press 

x

 or 

 to display the BLOCK CHANNEL menu.

9. Press 

x

 or 

 to highlight SET.

10. Press 

z

 to add the current channel to the list.

MOVE

[       ]

[       ]

ENABLE BLOCKING     [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE

BLOCK CHANNEL

VIDEO LOCK              OFF
 

SET UP

SELECT

SELECT [       ]

[       ]

BLOCK CHANNEL
          [SET ] 

CLEAR

0

0

0

6

SET UP

SET

END [EXIT]

11. Press 

EXIT

.

12. Repeat steps 1–11 to block additional channels.

TV
CABLE
VCR

MENU/

ENTER

CH RTN

RECALL

MUTE

CH

CH

VOL

VOL

1

4

7

2

5

8

3

6

9

0

ENT

100

POWER

o

EXIT

MENU

yz

 

x

 

EXIT

CHANNEL
NUMBERS

Summary of Contents for 32AF13









































Reviews: