Toshiba 32A33, Owner'S Manual

Page: 16 / 36

16
Setting up
y
our T
V
TV Front Panel
Changing the on-screen display language
You can choose from three different languages (English, French, or
Spanish) for the on-screen display of menus and messages.
To select an on-screen display language:
1. Press MENU .
2. Press
x
or
•
until the SET UP menu appears.
3. Press
y
or
z
to highlight LANGUAGE.
4. Press
x
or
•
to highlight your desired language.
MOVE SELECT [ ] [ ]
LANGUAGE:
CH PROGRAM
MORE
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE: [TV] CABLE
ADD/ERASE: [ADD] ERASE
SET UP
V-CHIP CONTROL
BOUGER CHOISIR [ ]
[ ]
LANGUE:
TV/CABLE:
PROGRAMME CAN
AJOUT/EFF:
ENGLISH [FRANCAIS] ESPANOL
[TV] CABLE
[AJOUT] EFF
CONFIGURATION
PLUS
CONTROLE V-CHIP
Selecting the signal source
You can use the TV/VIDEO button on the remote control or TV to select
the signal source connected to your TV.
To change the signal source:
Repeatedly press TV/VIDEO to select either TV, VIDEO 1,
VIDEO 2, or VIDEO 3 (32A43 and 36A43 only). The selected signal
source is highlighted on-screen.
TO SELECT PUSH TV/VIDEO
TV
VIDEO 1
VIDEO 2
TO SELECT PUSH TV/VIDEO
TV
VIDEO 1
VIDEO 2
VIDEO 3
32A33 32A43 and 36A43
To verify the signal source:
Press RECALL .
Programming channels into the TV’s memory
When you press CHANNEL ▲▼ on the TV or remote control,
the TV stops only on the channels stored in the TV’s memory.
Note: To tune the TV to a channel not programmed into the memory, use the
CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area
and store them in the TV’s memory. After the channels are stored
automatically, you can manually add or erase individual channels
(see page 17).
To program channels automatically:
1. Press MENU .
2. Press
x
or
•
to highlight the SET UP menu.
MENU TV/VIDEO VOLUME CHANNEL POWER
TV/VIDEO
MENU
T S ts
CHANNEL
s
/
t
TV/VIDEO
CHANNEL
yz
Channel
Numbers
RECALL
}
}
stT S
MENU