Toshiba 29VZ6DA, Service Manual

Page: 17 / 46

– 17 –
SPECIFIC INFORMATIONS
•
The adjustments below are not necessary under normal conditions. However, in areas of
inferior broadcast conditions where adjustment is necessary for a better picutre, adjust the
tuning with the MFT (Manual Fine Tuning). The AFT OFF status automatically keeps the
condition adjusted with the MFT function.
•
The AFT (Auto Fine Tuning) function automatically corrects slight fluctuations when receiving
signals.
•
When using Manual Search to preset the channel, the AFT will automatically turn ON and SKIP
to OFF.
MFT (Manual Fine Tuning)
Select the position number you want to fine-tune with
the position down
t
/up
s
buttons or digit/direct select
buttons.
Press the MENU and select theTUNING menu on the
screen.
Press the
t
/
s
buttons to move the cursor (
S
) to
“MFT”.
Press the MENU
–
/
+
buttons until the best possible
picture and sound are obtained.
Note
When operating the MFT function, the AFT status is
automatically set to OFF.
AFT (Auto Fine Tuning)
Select the position number you want to fine-tune with
the position down
t
/up
s
buttons or digit/direct select
buttons.
Press the MENU button and press the MENU
–
/
+
buttons to call up the TUNING menu on the screen.
Press the
t
/
s
buttons to move the cursor (
S
) to
“AFT”. Press the MENU
–
/
+
buttons to select the
“ON” indication.
Note
When position is set to AFT OFF status, the “
R
” mark
appears to the left of the position number.
When the channel is set to AFT ON status, the
position number is displayed without the “
R
” mark.
1
2
3
4
1
2
3
To skip a position number
After presetting the channels, you may skip unnecessary
position numbers so that only the channels you want to
watch are selected.
Select the position number to be skipped with the
CH
t
/
s
buttons or direct select buttons.
Press the MENU button and select SET UP munu on
the screen.
Press the MENU
t
/
s
buttons to move the cursor (
S
)
to “SKIP”.
Press the MENU
–
/
+
buttons to select “SKIP ON”.
Press the CALL button to turn off the SET UP menu
display.
Select the position number to be skipped with the direct
select buttons. The
* mark appears to the left of the
position number.
The position number will then be skipped when you
select channels with the
CH
t
/
s
buttons.
To restore a skipped position number
1 Select the position number you want to restore with the
direct select buttons.
2 Press the MENU button and select the SET UP menu
display and press the MENU
t
/
s
buttons to move the
cursor (
S
) to “SKIP”.
3 Press the MENU
–
/
+
buttons to select “SKIP OFF”.
1
2
3
4
5
MFT (Manual Fine Tuning) and
AFT (Auto Fine Tuning)