11
Auto tuning
searches for all the available
analogue
stations.
As an alternative to
auto tune
,
you can tune-in your
analogue
stations manually.
1
Press the
SELECT
button on the remote control to
begin the search for available
analogue
stations.
x
x x
x x
x x
x x
x
will flash and the bullet will move
along the line as the search progresses.
Auto tuning
You have selected analogue
TV for the first time.
Press SELECT to start the
tuning for Analogue TV
channels.
This will take 2 to 3
minutes
2
3
1
2
tuning-in your
analogue
stations
Searching
Channel : 21
Station :
Auto tuning
EXIT
: To exit
When the search is complete the TV will
automatically return to programme position 1.
If the picture is not clear you can change the
station order, using
Programme sorting
,
on
page 14.
analogue
manual tuning
Station
Programme
System
Search
Programme skip/
Channel
Manual fine
tuning
Press the
TV MENU
button to display the
analogue
menu bar. Use the
S
or
R
button to
highlight
Set up
from the top bar.
Now with the
P
or
Q
button, highlight
Manual
tuning
in the menu options and the
R
button to
select.
Set up
Colour
AUTO
Auto tuning
Manual tuning
Programme sorting
Teletext
Programme:
The number to be pressed on the remote control.
System:
Specific to certain areas.
See page 12.
Search:
Search up and down for a signal.
Programme skip:
* means nothing has been stored or the facility
to
skip
the programme is ON.
See page 13.
Channel:
The channel number on which a station is being
broadcast.
Manual fine tuning:
Only used if you experience interference/weak signal.
See page 14.
Station:
Station identification. You can use the
P
and
Q
or
S
and
R
buttons to enter up to seven characters.
EXIT
: To exit
Continued on the next page…
Until you tune-in analogue channels, when you
press the ATV/DTV button you will see the
Auto Tuning
prompt. You will need to run
Auto Tune
to be able to watch analogue programmes whilst
recording digital TV.
Several functions are included in the manual tuning
menu and are covered on the next few pages.
These options will appear as
you move across the screen:
…Remember… for
ANALOGUE
operation after
DIGITAL
operation, you
must have pressed
the ATV/DTV button
!
…allow the
television to
complete the
search.
SETTING UP
analogue
auto tune
and manual tune
