Toshiba 26WL46B, Service Manual

Page: 24 / 116

– 24 –
8. Removing the TN/AOUT, AV2 and Signal boards
1) Remove the back cover. (Refer to Item 1.)
2) Remove the top shield bracket. (Refer to Item 3.)
3) Remove the Scaler board. (Refer to Item 5.)
4) Remove the D-Rewrite board. (Refer to Item 6.)
5) Remove the back plates. (Refer to Item 7.)
6) Remove the connector [A] and 3 harnesses from the TN/AOUT board.
7) Remove 5 screws (STP 3x8), then remove the TN/AOUT board.
8) Remove the connector [B] from the Signal board.
9) Remove 3 screws (STP 3x8), then remove the AV2 board.
10) Remove 1 screw (BIDT2 3x10BZ), then remove the AV2 panel.
11) Remove the 6 wire harnesses and 2 FFC from the Signal board.
12) Remove 5 screws (STP 3x8), then remove the Signal board.
AV2
board
SIGNAL board
TN/AOUT
board
SIGNAL
board
Connector [A]
Connector [B]
AV2 panel
STP 3x8
STP 3x8
BIDT2 3x10 BZ
STP 3x8
Wire harness
Wire harnesses
Wire
harnesses
Wire harnesses
FFC