ELECTRICAL ADJUSTMENTS
D-4
2-15: TINT/COLOR CENT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Receive the color bar pattern.
Connect the oscilloscope to TP806.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (53) on the remote control to
select "TINT".
Press the VOL. UP/DOWN button on the remote control
until the section "A" becomes as straight line.
(Refer to Fig. 2-2)
Connect the oscilloscope to TP805.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (49) on the remote control to
select "COL.CENT".
Press the VOL. UP/DOWN button on the remote control
until the red color level is adjusted to 105
±
10% of the
white level. (Refer to Fig. 2-3)
Please check whether the waveform of TP806 is straight
line. If is not a straight line, adjust to TINT again.
Receive the color bar pattern. (Audio Video Input)
Press the TV/VIDEO button on the remote control to set to
the AV mode. Then perform the above adjustments 2~8.
Receive the color bar pattern.
Press the TV/VIDEO button on the remote control to set to
the CS mode. Then perform the above adjustments 2~8.
Receive the color bar pattern.
Press the TV/VIDEO button on the remote control to set to
the HD-MI mode. Then perform the above adjustments
2~8.
Fig. 2-2
"A"
2-17: Confirmation of Fixed Value (Step No.)
Please check if the fixed values of the each adjustment
items are set correctly referring below.
FUNCTION
V.POSI
V-EHT
H-EHT
V-BLK P
V-BLK S
V.LIMIT
V.CORR
C.S.CORR
S.CORR
CORNER
V.SYMM
R-Y GAIN
R-Y PHASE
G-Y GAIN
G-Y PHASE
BRI.MAX
BRI.MIN
CONT.CENT
CONT.MAX
CONT.MIN
COL.MAX
COL.MIN
SHARP.CENT
SHARP.MAX
SHARP.MIN
TEST STEREO
TEST AUVIO
NO.
03
07
08
09
10
12
13
14
19
20
23
39
40
41
42
44
45
46
47
48
50
51
54
55
56
58
59
RF
01
04
03
31
00
00
15
40
16
15
128
08
03
05
00
240
50
70
90
50
80
00
55
100
00
00
00
CS
01
04
03
31
00
00
15
40
16
15
128
08
03
05
00
240
50
70
90
50
110
00
64
100
00
00
00
AV
01
04
03
31
00
00
15
40
16
15
128
08
03
05
00
240
50
70
90
50
80
00
55
100
00
00
00
2-16: TILT
1.
2.
3.
4.
5.
6.
Connect the digital voltmeter between W843 and W844.
Receive the crosshatch signal from the Pattern Generator.
Press the PIC SIZE button on the remote control to select
the FULL screen mode.
Using the remote control, set the brightness and contrast
to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (57) on the remote control to
select “TILT CENT”.
Press the VOL. UP/DOWN button on the remote control
until the voltage become minimum(0V).
HD-MI
01
04
03
31
00
00
15
40
16
15
128
08
03
05
00
240
50
70
90
50
110
00
64
100
00
00
00
100%
120%
"A"
2-14: SEMSOR PARA
1.
2.
3.
4.
5.
6.
7.
Receive the crosshatch signal from the Pattern Generator.
Press the MENU button. And, then press the LEFT/
RIGHT button on the remote control until the PICTURE
menu appears.
Press the LEFT/RIGHT button on the remote control to
highlight DISPLAY FORMAT.
Press the LEFT/RIGHT button on the remote control to
select 1080i.
Set the screen mode to FULL.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (21) on the remote control to
select “C.PARA”.
Press the VOL. UP/DOWN button on the remote control
until the both ends vertical lines become straight.
Fig. 2-3
