Toshiba 20N7XE, Service Manual

Page: 20 / 55

– 20 –
SPECIFIC INFORMATIONS
PROGRAMMING CHANNEL MEMORY
Auto search memory (ASM)
All the channels that can be received are preset automatically.
1 Select the position for starting ASM, (0~9) or ( / ).
2 Set the correct broadcast system for your region.
Press (MENU) repeatedly to call up the SET UP menu on
the upper right of the screen.
And set COLOR to AUTO and select the SOUND accord-
ing to the table below by (
t
/
s
) and (–/+).
3 Select ASM, then press (+) to start the ASM. Return to the
start position. This completes the procedure.
Manual Search and Changing the assigned position
Example Presetting Channel 12 to Position 12
Method 1 — When Channel 12 is not preset to either
channel
→
Manual Search
1 Select Position 12.
Press ( / ) repeatedly until 12 is displayed.
Or, press (–/– –) once or twice to display – – on the screen.
Press 1 and 2 at Remote in that order.
2 Press (MENU) several times to display the SET UP menu
screen.
Press (
t
/
s
) and select “>>>”. Press (–/+) to search. Press-
ing “–” searches lower frequency channel; pressing “+”
searches higher frequency channels.
3 When Channel 12 is set, press (
t
/
s
) to select “ ”. Press
“+” (–/+) to complete the presetting.
To turn off the menu function display instantly
Press the (CALL) button.
Method 2 — When Channel 12 is preset to another posi-
tion
→
Change the assigned position.
1 Press (0~9) or ( / ) to find the position preset for Chan-
nel 12.
2 When Channel 12 is set, press (MENU) several times to
display the SET UP menu screen. Press (
t
/
s
) to select
the item “POSITION”. And press (–/+) repeatedly to set the
position number “P12”. Pressing “–” displays a smaller
number; pressing “+” displays a larger number.
3 When Position 12 is set, press (
t
/
s
) to select the item “ ”.
Press “+” (–/+) to complete the presetting.
To turn off the menu function display instantly
Press the (CALL) button.
Skip function
If you set SKIP ON for unnecessary position numbers, when
you select channels with (
/ ), that position is skipped.
Example Skipping position 13
1 Select Position 13.
Press ( / ) repeatedly until 13 is displayed.
Or, press (–/– –) once or twice to display – – on the screen.
Press 1 and 3 at Remote in that order.
2 Press (MENU) several times to display the SET UP menu
screen. Press (
t
/
s
) to select the item “SKIP”. Press (–/+)
to switch from OFF to ON. This completes the setting.
To turn off the menu function display instantly
Press the (CALL) button.
Note • When SKIP is on, “
∗
”is added to the left of the position
number. Example:
∗
13
Select position 13 with (–/– –) and (1, 3) to confirm
“
∗
”mark.
• If you want to restore a skipped position number, select
the skippied position number with (–/– –) and (1, 3)
buttons and Switch from ON to OFF on step 2 above.
Manual fine tuning (MFT)
Press (MENU) several times to display the SET UP menu
screen.
Press (
t
/
s
) and select MFT. Press (–/+) to start fine
tuning. Pressing “–” fine tunes to a lower frequency;
pressing “+” fine tunes to a higher frequency.
To turn off the menu function display instantly
Press the (CALL) button.
*Please refer to owner's manual in detail.