Toshiba 2010 User Manual Download

Page: 31 / 212

Finding Your Way Around

Front with the display panel open

5.375 x 8.375 ver 2.3.2

The

power button

turns the computer on and off.

The

function keys

, when used with the

key, activate

several different system functions. For more information, see

“Hot Keys” on page 179

The

TouchPad

enables you to move the cursor with the

stroke of a finger.

The

Primary

control button

next to the TouchPad acts like

the primary button on a mouse.

The

Secondary

control button

next to the TouchPad acts

like the secondary button on a mouse.

The

keyboard indicator panel

is a set of lights below keys

F10 and F11. For more information, see

“Keyboard indicator

panel” on page 31

The

Internet button

turns on the computer and launches

your default Internet browser.

The

TOSHIBA Console button

allows quick access to

various functions.

Keyboard indicator panel

The

cursor control mode

light glows when the cursor

control overlay is on. When this light is on, pressing an
overlay key moves the cursor in the direction of the arrow
printed on the key instead of typing the letter printed on the
key.

The

numeric mode

light glows when the numeric overlay is

on. When this light is on, pressing an overlay key types the
number printed on the key instead of typing the letter printed
on the key.

Numeric mode

Cursor control mode

Summary of Contents for 2010





















































































































































































































Search results

Summary of Contents for 2010

Reviews:

Related manuals for 2010

Brands by name

Popular brands

Toshiba 2010, User Manual

Search results

Summary of Contents for 2010

Reviews:

Related manuals for 2010

Brands by name

Popular brands