Toshiba 19SL738G Owner'S Manual Download

Page: 56 / 61

English

PROBLEM SOLVING

What can be done if the user-defined password has

been forgotten?

Use the universal password 1276, then

change to a new number of your choice.

Why does the TV turn off by itself?

After roughly 15 minutes without any input

video signal at TV mode, the TV will turn off to

save power.

Does this TV support the DPMS?

This set is equipped with a function for saving

energy which supports the VESA Display

Power Management Signaling (DPMS)

standard. This means that the monitor must

be connected to a computer which supports

VESA DPMS. To exit DPMS mode, press

button on the remote control to wake up the

TV.

Why does some on-screen information appear as

strange symbols?

Please make sure your “Country” setting is

correct.

Why don't the REGZA-LINK devices work?

When the connected REGZA-LINK device

does not work correctly after you have

changed the settings of the device, turn off

your television and unplug the power cord,

and then plug and turn on again.

Unplug the HDMI cable of the REGZA-LINK

device and lead again.

Why is the REGZA-LINK logo still showing when

the equipment has been disconnected?

If the REGZA-LINK device is disconnected,

the logo will disappear after approximately

one minute.

Summary of Contents for 19SL738G






























































Search results

Summary of Contents for 19SL738G

Reviews:

Related manuals for 19SL738G

Brands by name

Popular brands

Toshiba 19SL738G, Owner'S Manual

Search results

Summary of Contents for 19SL738G

Reviews:

Related manuals for 19SL738G

Brands by name

Popular brands