background image

Others

72

Specifications

Model  19LV61K

22LV61K

26LV61K

General

Power supply

AC 120V 60Hz

Power consumption

Operation: 38 W, 
Stand by: 0.8 W

Operation: 51 W, 
Stand by: 0.8 W

Operation: 102 W, 
Stand by: 0.7 W

Weight

11.2 lbs (5.1 kg)

13.5 lbs (6.1 kg)

19.4 lbs (8.8 kg)

Dimensions

Width: 18-3/4 inches (476 mm)
Height: 14-5/16 inches (364 mm)
Depth: 8-1/8 inches (207 mm)

Width: 21-5/8 inches (550 mm)
Height: 16 inches (407.1 mm)
Depth: 8-1/8 inches (207 mm)

Width: 26-13/16 inches (681 mm)
Height: 20-1/4 inches (513.9 mm)
Depth: 8-15/16 inches (226.7 mm)

Operating temperature

5°C-40°C (41°F-104°F)

Operating humidity

Less than 80% RH (No condensation)

Television

LCD panel (Screen size is 
approximate.)

18.5-inch diagonal

21.6-inch diagonal

26.01-inch diagonal

Display method

Color TFT LCD

Number of pixels

1366 (Horizontal) x 768 (Vertical)

Television system

NTSC standard, ATSC standard (8VSB), QAM

Receiving channels

VHF: 2-13
UHF: 14-69
CATV: 1-135 (4A, A-5~A-1, A~I, J~W, W+1~W+94)

Antenna input

VHF/UHF 75

Speaker

1 x 2-13/16 inches (25.4 x 71.1 mm), 8  x 2

1-5/8 x 4-13/16 inches 
(40.6 x 121.9 mm), 8  x 2

Audio output power

1.5W + 1.5W

5.0W + 5.0W

DVD/CD player

Signal system

NTSC

Applicable disc

1. DVD (12cm, 8cm)
2. CD (12cm, 8cm)

Pickup

1-Lens, 2-Beams System

Input/Output

S-Video input

(Y) 1.0 V (p-p), 75 , negative sync., Mini DIN 4-pin x 1
(C) 1.0 V (p-p), 75

ColorStream video input

(Y) 1.0 V (p-p), 75 , negative sync., pin jack x 1
(PB, PR) 0.7 V (p-p), 75 , pin jack x 2

Video input

1.0 V (p-p), 75 , negative sync., pin jack x 1

1.0 V (p-p), 75 , negative 
sync., pin jack x 2

Audio input

–8dBm, 50 k, negative sync., pin jack (L/R) x 2

Audio output

–8dBm, 50 k, negative sync., 
pin jack (L/R) x 1

HDMI input

HDMI compliant (type A connector), HDCP compliant, E-EDID compliant
Suggested scan rates: 480i, 480p, 720p, 1080i, 1080p
HDMI Audio: 2-channel PCM, 32/44.1/48 kHz sampling frequency, 16/20/24 bits per sample

PC input

MONITOR: Mini-Dsub 15pin x 1, AUDIO: 3.5ø mm Stereo jack x 1

Digital audio output 
(Coaxial)

0.5 V (p-p), 75 , pin jack x 1

Headphone

ø3.5mm stereo mini jack x 1

Accessories

Remote control (19LV61K/22LV61K/26LV61K: SE-R0305) ................................................................................................................... 1
Batteries (R03/AAA)  ............................................................................................................................................................................ 2
AC cord ................................................................................................................................................................................................ 1
Cleaning cloth .............................................................................. ........................................................................................................ 1
Owners manual (this booklet) ..................................................... ........................................................................................................ 1
Quick setup guide (Spanish) ................................................................................................................................................................ 1

•  This model complies with the above speci cations.
•  Designs and speci cations are subject to change without notice.
•  This model may not be compatible with features and/or speci cations that may be added in the future.

Others

73

Limited One (1) Year Warranty on Parts and Labor

TACP warrants this LCD TV/DVD Combination 
and its parts against defects in materials or 
workmanship for a period of one (1) year after 
the date of original retail purchase.  DURING 
THIS PERIOD, TACP WILL, AT TACPS OPTION, 
REPAIR OR REPLACE A DEFECTIVE PART WITH 
A NEW OR REFURBISHED PART WITHOUT 
CHARGE TO YOU.  

Rental Units

The warranty for LCD TV/DVD Combination rental 
units begins on the date of the  rst rental or thirty 
(30) days after the date of shipment to the rental 
 rm, whichever comes  rst.

Commercial Units

LCD TV/DVD Combinations sold and used for 
commercial purposes have a limited warranty for all 
parts and labor, which warranty begins on the date 
of original retail purchase and ends on the date that 
is ninety (90) days thereafter.

Owners Manual and Product Registration Card

Read this owners manual thoroughly before operating 
this LCD TV/DVD Combination. 

Complete and mail the enclosed product registration
card or register your LCD TV/DVD Combination 
online at www.tacp.toshiba.com/service as soon as 
possible. By registering your LCD TV/DVD 
Combination you will enable TACP to bring you 
new products speci cally designed to meet your 
needs and help us to contact you in the unlikely 
event a safety noti cation is required under the 
U.S. Consumer Product Safety Act. Failure to 
complete and return the product registration card 
does not diminish your warranty rights.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO 
THE FOLLOWING CONDITIONS:

(1)  You must retain your bill of sale or provide 

other proof of purchase.  

(2)  All warranty servicing of this LCD TV/DVD 

Combination must be made by the Depot 
Warranty Repair Center speci ed by the TACP 
Consumer Solutions Center.

(3)  The warranties from TACP are effective only 

if the LCD TV/DVD Combination is purchased 
and operated in the Continental U.S.A. or 
Puerto Rico.

(4)  Labor service charges for set installation, 

setup, adjustment of customer controls, and 
installation or repair of antenna systems are not 
covered by this warranty.  Reception problems 
caused by inadequate antenna systems are 
your responsibility.

(5)  Warranties extend only to defects in materials 

or workmanship as limited above, and do not 
extend to any LCD TV/DVD Combination or 
parts that have been lost or discarded by you 
or to damage to the LCD TV/DVD Combination 
or parts caused by  res, misuse, accident, 
Acts of God (such as lightning or  uctuations in 
electric power), improper installation, improper 
maintenance, or use in violation of instructions 
furnished by TACP; use or malfunction 
through simultaneous use of this LCD TV/DVD 
Combination and connected equipment; or to 
units that have been modi ed or had the serial 
number removed, altered, defaced, or rendered 
illegible.

Limited United States Warranty
LCD TV/DVD Combination - Depot Repair Warranty

Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original 
consumers in the United States.  THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER 
PURCHASER OR ANY PERSON RECEIVING THIS LCD TV/DVD COMBINATION AS A GIFT FROM THE 
ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.

LCD TV/DVD COMBINATIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE 
OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED 
BY THESE WARRANTIES.  

LCD TV/DVD COMBINATIONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, 
WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED 
BY THESE WARRANTIES.

Others

74

No person, agent, distributor, dealer, or company 
is authorized to change, modify, or extend 
the terms of these warranties in any manner 
whatsoever.  The time within which an action must 
be commenced to enforce any obligation of TACP 
arising under the warranty or under any statute 
or law of the United States or any state thereof is 
hereby limited to ninety (90) days from the date 
you discover, or should have discovered, the 
defect.  This limitation does not apply to implied 
warranties arising under state law.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS AND YOU MAY ALSO HAVE OTHER 
RIGHTS WHICH MAY VARY FROM STATE TO 
STATE IN THE U.S.A.  SOME STATES OF THE 
U.S.A. DO NOT ALLOW LIMITATIONS ON HOW 
LONG AN IMPLIED WARRANTY LASTS, WHEN 
AN ACTION MAY BE BROUGHT, OR THE 
EXCLUSION OR LIMITATION OF INCIDENTAL 
OR CONSEQUENTIAL DAMAGES, SO THE 
ABOVE PROVISIONS MAY NOT APPLY TO YOU 
UNDER SUCH CIRCUMSTANCES.

How to Obtain Warranty Services

If, after following all of the operating instructions 
in this manual and checking the section 
“Troubleshooting,” you  nd that service is needed:

(1)  For instructions on how to obtain warranty 

service for your LCD TV/DVD Combination, 
contact TACPs Consumer Solution Center toll 
free at 1-800-631-3811.

(2)  You must include a copy or original bill of 

sale or other proof of purchase along with 
the entire LCD TV/DVD Combination to the 
Depot Warranty Repair Center speci ed by 
the TACP Consumer Solutions Center.  You 
are responsible for all inbound transportation 
and insurance charges for the LCD TV/DVD 
Combination to the Depot Warranty Repair 
Center speci ed by the TACP Consumer 
Solutions Center.

For additional information, visit TACPs website:
www.tacp.toshiba.com

ALL WARRANTIES IMPLIED BY THE LAW OF 
ANY STATE OF THE U.S.A., INCLUDING THE 
IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE, 
ARE EXPRESSLY LIMITED TO THE DURATION 
OF THE LIMITED WARRANTIES SET FORTH 
ABOVE. WITH THE EXCEPTION OF ANY 
WARRANTIES IMPLIED BY THE LAW OF ANY 
STATE OF THE U.S.A. AS HEREBY LIMITED, 
THE FOREGOING WARRANTY IS EXCLUSIVE 
AND IN LIEU OF ALL OTHER WARRANTIES, 
GUARANTEES, AGREEMENTS, AND SIMILAR 
OBLIGATIONS OF TACP WITH RESPECT TO 
THE REPAIR OR REPLACEMENT OF ANY 
PARTS. IN NO EVENT SHALL TACP BE LIABLE 
FOR CONSEQUENTIAL OR INCIDENTAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
LOST PROFITS, BUSINESS INTERRUPTION, OR 
MODIFICATION OR ERASURE OF RECORDED 
DATA CAUSED BY USE, MISUSE OR INABILITY 
TO USE THIS LCD TV/DVD COMBINATION).

Summary of Contents for 19LV61K - 18.5" LCD TV










































































































Reviews: