![Toshiba 19DV616DG Service Manual Download Page 38](http://html.mh-extra.com/html/toshiba/19dv616dg/19dv616dg_service-manual_427970038.webp)
1-4: DVD MT PCB and DVD DECK (Refer to Fig. 1-4)
1-5: POWER PCB and REMOCON PCB (Refer to Fig. 1-5)
1. Put the Back Cabinet Ass'y on the bottom.
1. Remove the 2 screws (1).
2. Short circuit the position shown in
Fig. 1-4
using a
2. Remove the Plate PCB in the direction of arrow (A).
soldering iron. If you remove the DVD Deck with no
3. Remove the 6 screws (2).
soldering, the Laser may be damaged.
4. Disconnect the following connector:
3. Disconnect the following connectors:
(CP501 and CP8101).
(CP2301, CP2302, CP2305, CP8501 and CP8502).
5. Remove the Power PCB in the direction of arrow (B).
4. Remove the 3 screws (1).
6. Disconnect the following connector:
(CP7601).
5. Remove the DVD DECK Ass'y in the direction of
7. Remove the screw (3).
arrow (A).
8. Remove the Remocon PCB in the direction of arrow (C).
6. Remove the 2 screws (2).
7. Remove the Shield LVDS in the direction of arrow (B).
8. Unlock the 2 supports (3).
9. Remove the DVD MT PCB in the direction of arrow (C).
DISASSEMBLY INSTRUCTIONS
(1)
DVD MT PCB
(2)
(2)
(B)
DVD Deck Ass'y
(1)
(1)
CP2302
CP2301
CP8501
CP8502
(C)
Shield LVDS
Power PCB
(2)
(2)
(1)
(2)
(1)
(2)
(2)
Remocon PCB
(3)
CP501
CP8101
(A)
(B)
CP7601
Plate PCB
(C)
(2)
(3)
CP2305
Pick Up PCB
B1-2
19DV616DG
1-6: MAIN PCB and TUNER PCB (Refer to Fig. 1-6)
1. Remove the 2 screws (1).
2. Disconnect the following connector:
(CP5803).
3. Remove the Tuner PCB in the direction of arrow (A).
NOTE
4. Remove the 4 screws (2).
5. Disconnect the following connector:
1. Before your operation, please read "PREPARATION
(CP2201 and CP5801).
OF SERVICING".
6. Remove the Main PCB in the direction of arrow (B).
2. Use the Lead Free solder.
3. Manual soldering conditions
• Soldering temperature: 320 ± 20
o
C
• Soldering time: Within 3 seconds
• Soldering combination: Sn-3.0Ag-0.5Cu
4. When Soldering/Removing of solder, use the drawing
equipment over the Pick Up Unit to keep the Flux
smoke away from it.
5. When installing the DVD Deck, remove all the soldering
on the short circuit position after the connection of Pick
Up PCB and DVD MT PCB connector.
(A)
DVD Deck Ass y
Fig. 1-4
Back Cabinet Ass'y
Short circuit using a
soldering iron.
Back Cabinet Ass'y
Fig. 1-5
Mian PCB
Back Cabinet Ass'y
(1)
(2)
(1)
(2)
(2)
Fig. 1-6
(2)
CP5803
(A)
(B)
CP5801
Tuner PCB
CP2201
B1-2
19DV616DG