English
31
CONTROLS AND FEATURES
Press ◄ or ► to select
Cool, Medium,
Warm
or
User
to suit your preference.
Colour Temperature
User
0
0
0
R Gain
G Gain
B Gain
Colour Temperature
Select
Back
Exit
EXIT
RETURN
NOTE:
R/G/B Gain: Increase or decrease the
red/green/blue levels in the picture.
Cinema Mode
The frame rate of a movie film is generally 24
frames a second whereas the movie software
such as DVD, etc. that you enjoy watching on
television at home is 30 or 25 frames a second.
The difference in frame rate may cause flickers
whilst viewing the films on television; set the
Cinema Mode
to convert the signal to reproduce
a smooth motion and picture quality.
In the
PICTURE
menu, press ▼ to
highlight
Advanced Video
and press ► to
enter
.
Press ▼ to highlight
Cinema Mode
, and
press ◄ or ► select from
On
or
Off.
7
Advanced Video
Select
Back
Exit
EXIT
RETURN
On
Cinema Mode
Auto
Off
Off
NR
CTI
Adaptive Luma Control
On
Active Backlight
Blue Screen
3D Colour Management
Base Colour Adjustment
DNR
DNR
(Digital Noise Reduction) enables you to
‘soften’ the screen representation of a weak
signal to reduce the noise effect.
In the
PICTURE
menu, press ▼ to
highlight
Advanced Video
and press ► or
to enter.
Press ▲ or ▼ to highlight
NR
and press ►
or to enter.
Press ▲ or ▼ to highlight
DNR
and press
◄ or ► to select
Low, Middle, High, Auto
or
Off
.
NR
Select
Back
Exit
EXIT
RETURN
Auto
Low
DNR
MPEG NR
MPEG NR
If the receiving signal of MPEG has a grained
noise depending on the compression and
conversion, the noise may be reduced when
using this function.
In the
PICTURE
menu, press ▲ or ▼ to
highlight
Advanced Video
and press ► or
to enter.
Press ▲ or ▼ to highlight
NR
and press
► or
to enter.
Select the
MPEG NR
and press ◄ or ► to
select
Low, Middle, High,
or
Off
.
NR
Select
Back
Exit
EXIT
RETURN
Auto
Low
DNR
MPEG NR
CTI
The Colour Transient Improvement (CTI) involves
the detection and sharpening of edges around
colour objects on the screen.
In the
PICTURE
menu, press ▼ to
highlight
Advanced
Video
and press ► or
to enter.
Select the
CTI,
and press◄ or ► to select
Auto
or
Off
.
