English
21
TUNING THE TELEVISION
Channel Edit
Edit the channel number and channel name.
Select
Channels
from the
SETUP
menu.
Highlight
Channel Edit
and press ► or
to select.
Using ▲ or ▼ to highlight the channel and
press
to select.
4
Change
the
Channel Number
by using the
number buttons 0~9. Change the
Channel
Name
by pressing the number buttons 0~9
to enter numbers and letters.
NOTE:
Colour System/Sound System can be
changed only in Analogue TV
.
Set
Select
Back
OK
EXIT
RETURN
Network Name:
R seau Num rique Terre
1
TF1
B/G
Auto
490
Channel Number:
Channel Name:
Frequency
Colour system
Sound system
Channels Edit
Exit
Channel Decode
Channel Decode support the Canal+ (paid
television channel); however, the channel also
broadcast some un-encrypted programmes.
These programmes without encryption can be
viewed free of charge.
Select
Channels
from the
SETUP
menu.
Highlight
Channel Decode
and press ► or
to select.
Use ▲or ▼ to highlight the channel and
press
to set.
Analogue Channel Fine Tune
When the reception is poor, you can use this
function to do the fine tuning.
In the
SETUP
menu press ▼ to highlight
Channels
and press ► or
to select.
Press ▼ to highlight
Analogue Channel
Fine Tune
and press
to select.
Highlight and press
to select the
channel.
4
Use ◄ or ► to adjust the frequency. Press
◄ to decrease and ► to increase the
frequency.
Common Interface
This function enables you to watch some pay
services (encrypted services). When the module
is inserted into the CI slot, you can access the
module menu. To purchase a module and smart
card, contact your dealer. Common Interface
functions may not be possible depending upon
the country broadcasting circumstances.
Press
MENU
and use ◄ or ► to select
SETUP
.
Press ▼ to highlight
Common Interface
and press ► or
.
Press
to select the CI card to view the
Module information.
Reset Default
Selecting
Reset Default
will reset all TV settings
to their original factory values, excludes Country,
OSD Language, and Channels.
In the
SETUP
menu press ▼ to highlight
Reset Default
and press ► or
to select.
Select
OK
to confirm or select
Cancel
to
exit.