1-8
3. Remove the core (5) and the cushion (6) from the 20
pin connector (4).
4. Remove the connectors (4) from the four locations,
then remove the main PC board (7).
Fig. 1-2-16
Note:
• Return the wiring to their original positions during
assembly.
2-10.Front Net, Speaker
1. Remove four screws (1).
2. Remove the GND lead wire (2), then remove the front
net assembly (3).
3. Remove four screws (4), then remove the right speaker
(5), four screws (6) and the left speaker (7).
4. The front net assembly (3) will come apart to the front
net (8) and the chassis (9) when claws A are released.
Fig. 1-2-17
2-11. Switch PC Board
1. Remove the cushion (1).
2. Remove the connector (2).
3. Remove one screw (3), then remove the switch PC
board (4).
4. Remove the power button cover (5), the power button
(6) and the 5-knob switch button (7).
Fig. 1-2-18
2-12.Hinge, Top Cover
1. Remove two screws (1), remove the left support (2)
and the left hinge (3).
2. Remove two screws (4), the right support (5) and the
right hinge (6), then remove the top cover (7).
Fig. 1-2-19
Main PC board (7)
Cushion (6)
Connectors (4)
Core (5)
Connector (4)
Bundled wires
Screws (1)
GND lead wire (2)
Front net assembly (3)
Screws (4)
Screws (6)
Right speaker (5)
Left speaker (7)
Front net (8)
Chassis (9)
Claw A
Claw A
Claw A
Claw A
Claw A
Cushion (1)
Connector (2)
Screw (3)
Switch PC board (4)
GND lead wire
Power button cover (5)
Power button (6)
5-knob switch
button (7)
Screws (1)
Left support (2)
Left hinge (3)
Screws (4)
Right
support (5)
Right hinge (6)
Top cover (7)
GND lead wire
GND
lead wire
