![background image](http://html.mh-extra.com/html/toshiba/15dlv77b/15dlv77b_service-manual_431201013.webp)
20
Notes:
•
If the unit does not operate properly, or No key
operation (by the unit and/or the remote control):
Static electricity, etc., may affect the TV/DVD’s
operation. In such case, disconnect the AC cord once,
then connect it again.
• The TV section has its own menu and DVD section also
has its own menu
54
.
/ / /
Press MENU in the TV mode, then press
or
to display the “SETUP” menu.
2
Press EXIT/CANCEL to clear the menu screen.
3
Setting the language
This TV/DVD can display the on screen language in English, Spanish or French
in the TV mode.
Select the language you prefer fi rst, then proceed with the other menu options.
Setting the language
Basic setup
1
MENU
EXIT/CANCEL
ENTER
21
Basic setup
Press
or
to select “TV/CABLE”.
1
2
Press MENU in the TV mode, then press
or
to display the “SETUP” menu.
Press EXIT/CANCEL to clear the menu screen.
4
Press
or
to select “TV” or “CABLE”.
3
TV - VHF/UHF
channels
CABLE - Cable
TV channels
TV/CABLE selection
To memorize channels
This TV/DVD is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory, skipping
over unwanted channels. Before selecting channels, they must be
programmed into the TV/DVD’s memory. To use this TV/DVD with an
antenna, set the TV/CABLE selection to the TV position. When shipped from
the factory, this selection is in the CABLE position.
To ADD/ERASE channels
Press MENU in the TV mode, then press
or
to
display the “SETUP” menu. Press
or
to select the
“CH PROGRAM”, then press
or
.
The TV will begin memorizing all the channels available
in your area.
Automatic memory tuning
Press
or
.
The “ADD/ERASE” menu will appear.
Press
or
to select “ADD/ERASE”, then
press
or
.
2
Press
or
to select the channel you want and
then press
or
to select “ADD” or “ERASE”.
3
1
Press MENU in the TV mode, then press
or
to
display the “SETUP” menu.
Press
or
to select “ADD/ERASE”.
Repeat steps 3 for other channel you want to
add or erase.
4
/ / /
MENU
EXIT/CANCEL
5
To add a digital channel you are watching:
Select a channel you want to add. Then select “ADDING
CHANNEL” in step 2, then press
or .
Press EXIT/CANCEL to clear the menu screen.
22
TV operation
Adjust the volume level by pressing VOL +/–.
The volume level will be indicated on the screen by
white bars. As the volume level increases, so do
the number of bars. If the volume decreases, the
number of white bars also decreases.
Set the TV/CABLE selection to the appropriate
position
21
.
1
2
3
Press direct channel selection (0–9, 100/-) or
CH
or
to select the channel.
TO SELECT ANALOG CHANNELS
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9:
Press
0
twice, then 1-9 as needed.
Example, to select channel 2, press
002
.
10-99: Press
0
, then the remaining 2 digits.
Example, to select channel 12, press
012
.
100-125: Press the 3 digits in order. Example, to
select channel 120, press
120
.
TO SELECT DIGITAL CHANNELS
Press the fi rst 3 digits, then press the “
100/-
”
button, followed by the remaining 3 digits.
Example, to select channel 015-001, press
015 -
001.
4
Notes:
• If a channel with no broadcast is selected, the sound will
automatically be muted.
• Digital channels may be represented by channel
numbers that include a “dash” (e.g., 85–002). These
digital channel numbers may not match the numbers in
the channel line-up provided by your cable company.
This is not a malfunction.
To turn on the TV/DVD, press POWER.
The power indicator on the front of the main unit
will light.
POWER
TV
- VHF/UHF channels
CABLE - Cable TV channels
TV operation
TV operation
TV
CATV
VHF
2-13
VHF
2-13
UHF
14-69
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
0–9,100/-
VOL +/-
CH /
23
TV operation
■
DISPLAY
Press
DISPLAY
to display the information on the TV
screen.
To cancel the display, press
DISPLAY
again.
■
CH RETURN
This button allows you to go back to the last channel
selected by pressing
CH RTN
. Press
CH RTN
again to
return to the last channel you were watching.
■
MUTE
Press
MUTE
to switch off the sound. The TV/DVD’s
sound will be silenced and “MUTE” will appear briefl y
on the screen. The sound can be switched back on by
pressing this button again or
VOL
+/–
.
■
SLEEP
To set the TV/DVD to turn off after a preset amount of
time, press
SLEEP
on the remote control. The clock
will count up 10 minutes for each press of
SLEEP
(OFF, 0h10m,... 1h50m, 2h00m). After the sleep
time is programmed, the display will appear briefl y
every ten minutes to remind you that the sleep timer
is operating. To confi rm the sleep timer setting, press
SLEEP
and the remaining time will be displayed for a
few seconds. To cancel the sleep timer, press
SLEEP
repeatedly until the display turns to OFF.
■
GAME MODE
After connecting a TV Game to the unit (see page 15),
press
GAME
. The TV screen changes to the Game mode.
• The Game mode screen is adjusted to the suitable
brightness for your eyes.
• If
GAME
is pressed during standby mode, the unit
turns on automatically and the Game mode screen
appears on the screen.
• Interactive video games that involve shooting a
“gun” type of joy-stick at an on-screen target may
not work on this TV/DVD.
■
HEADPHONES
Insert a stereo headphones (not supplied) with a 1/8” mini
plug into the HEADPHONE jack on the front panel.
If you connect headphones, the sound from TV speakers
is muted.
TV operation
(Digital channel)
(Analog channel)
GAME
DISPLAY
CH RTN
VOL +/-
SLEEP
MUTE