Toshiba 1402XWHT6-E, Owner'S Manual

Page: 10 / 58

Toshiba XXXXXXX(<SanSerif1>X/X)
– 10 –
Hydro Unit
Owner’s Manual
Hot water boost
This function is used when temporarily giving priority to
the hot water supply operation.
The hot water supply operation is performed in
preference to other operations with a target of the
preset time (60 minutes) and the preset temperature
(75°C). Use this function when hot water is not used for
a long time or before using a large amount of hot water.
• When the HOT WATER BOOST
button is
pressed, the mark appears on the remote
controller and the hot water boost operation starts.
When the set time period has passed or the water
temperature has reached the set temperature, the
hot water boost operation ends automatically.
• The preferential time and temperature settings can
be changed to values within a range of 30 to 180
minutes and 40 to 80°C. Ask the installation
company for the setting change.
Anti bacteria
This function performs anti-bacteria operation of the
hot water tank.
• When the ANTI BACTERIA
button is
pressed, the mark appears on the remote
controller and the anti-bacteria operation is
reserved.
• The anti-bacteria operation is performed to maintain
the preset temperature (75°C) for the set time period
(30 minutes) when the preset start time (22:00)
comes according to the preset interval (7 days).
• The settings of these interval, start time, and
temperature maintaining time period can be
changed, but ask the installation company for the
setting change.
„ Schedule timer
Operations can be scheduled in eight STEPs for each
day of the week.
(Example)
• Monday
STEP1:
04:00 ZONE1: Heating 45°C, hot water 50°C
STEP2:
07:00 ZONE1: Heating 50°C, hot water 45°C
STEP3:
10:00 ZONE1: Heating disabled, hot water 45°C
STEP4:
16:00 ZONE1: Heating 50°C, hot water 50°C
STEP5:
23:00 ZONE1: Heating 40°C, hot water 45°C
• Tuesday to Saturday: Same as Monday
• Sunday
STEP1:
04:00 ZONE1: Heating 45°C, hot water 50°C
Setting the schedule function
Press the SCHEDULE button and press the
SET button within five seconds while the mark
is blinking. The mark changes to lighting and the
schedule function starts working.
Cancelling the schedule function
Press the SCHEDULE button and press the
CL button within five seconds while the mark is
blinking. The mark disappears and the schedule
function is cancelled.
9-EN
z__EE99903501_4L_Hydro_OM.book Page 10 Friday, July 31, 2009 11:37 AM