Toshiba teli BG Series, Instruction Manual

Page: 67 / 162

66 / 160
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All Rights Reserved. http://www.toshiba-teli.co.jp/en/index.htm
D4259344C
BayerProcessingMode
In the color model, you can select the BayerProcessingMode of Bayer output.
Color process function be applied is dependent on the setting.
Selection of BayerProcessingMode is as following table.
BayerProcessingMode Function
Full Full processes are available
Partial Partial processes are available
Raw Only Gain feature is available
Function Full (
*
) Partial Raw
Gain ○ ○ ○
BlackLevel ○ ○ -
Gamma ○ ○ -
BalanceRatio ○ ○ -
LUTControl ○ ○ -
DPCControl ○ ○ -
* initial factory setting
● GenICam Node
Name Interface
Length
Byte / [bit]
Access Description
BayerProcessingMode IEnumeration 4 R/W Selects a Bayer Processing Mode.
● IIDC2 Register
Register Field Address
Length
Byte / [bit]
Access Description
BayerProcessingMode Implemented 0x21F420 [31] R Returns the state whether the function is implemented.
ListOfElements 0x21F42C
~0x21F438
16 R Returns the presence of the pixel endian.
[0] : Raw
[8] : Partial
[16] : Full
Value 0x21F43C 4 R/W Selects a Bayer Processing Mode.