TOSCA 100096 Manual Download Page 4

4

www.homewerksww.com

INSTALLATION INSTRUCTIONS

INSTALLING THE Z-BAR FOR HANGING MIRROR

PlacetheZ-bar(D)atthedesiredlocationonthewall,usingalevelfor

finalpositioning.MarkthelocationofthethreeholesintheZ-bar(D)on

the wall. Drill 1/4 in. holes at the marked locations and insert included 

wallanchors(B).SecureZ-bar(D)tothewallwiththreeincluded

screws(C).

Vertical mount

D

FIGURE 1

D

C

B

MIRROR WIRING

LocatetheWhite(neutral),Black(live)andGreen(ground)wiresare

extended from the cord in the back of the mirror. With the power turned off, 

connect the wires on the mirror with the neutral, live and ground house 

wireswithwireconnectors(included).

ATTENTION – 100108 ROUND MIRROR: 

This model includes three 

prong plug - disregard wiring diagram and plug into GFCI where 

required by local code.

IMPORTANT NOTE:

 Follow all local electrical and building codes when 

wiring your device and consult an electrician.

Mirror

House

black

black

white

neutral
ground

live

white

green

green

HANG AND SECURE THE MIRROR

HangmirrorontheZ-bar(D),centeringitandensuringthatitissecurely

hanging(seeFIGURE2).

MIRROR INSTALLATION CONFIGURATIONS:

Vertical or Horizontal - Models:

100087, 100093, 100084, 100090, 100096
Vertical only - Models:

100108, 100099, 100102, 100105

FIGURE 2

D

OPERATING INSTRUCTIONS

DIMMABLE LED LIGHT (100096, 100084, 100090, 100099, 100102, 100105): 

 To turn the mirror light ON, press the switch   on the mirror, hold on three 

secondstobegindimmable,tofindyourdesiredbrightness,continuepressingtheswitch , the light will turn from 100% to 10%. Repeat until desired 

brightness is discovered.

ROUND DIMMABLE LED LIGHT (100108): 

To turn the mirror light ON, press the switch   on the mirror, hold on three seconds to begin dimmable,  

tofindyourdesiredbrightness,continuepressingtheswitch , the light will turn from 100% to 10%. Repeat until desired brightness is discovered.

TAP-TAP COLOR CHANGING LED LIGHT (100087, 100093):  

To turn the mirror ON, press the switch   on the mirror, it will turn on with warm  

light, when you press again, it will change white color, the third press will turn off.

NOTE:

Allmirrorlightshavememory.Whenyousetyourdesiredbrightnessorcolortemperture(dependingonwhichmodelyouhave)andyouturnoffthe

mirror at the wall switch it will save your last setting. When the wall switch is turned back on, the mirror will light to the last setting.

CARE AND MAINTENANCE

When cleaning your LED mirror, a mild non-abrasive glass cleaner is recommended. Apply to a soft cloth or paper towel. 

CAUTION:

 Do not spray 

cleanser directly onto the mirror or frame.

Reviews: