39
Label Printing Scale
13.2.3.- ADHOC <HOT SPOT> CONECTION CONFIGURATION.
1.- Follow the steps on section 13.2 type of connection configuration
P.28
and choose ADHOC <HOT SPOT> by pressing ENTER.
2- Wait a few seconds while the scale activates this function and
saves changes, once done, it goes automatically into SETTINGS.
3.- The connection indicator will go off, see reference (section 4.1 p.
10
). Press ENTER to go into the parameters of this option.
Once in move around with the arrow keys
You can choose between NETWORK NAME, NETWORK
PASSWORD, INITIATE, ADHOC. Choose one by pressing ENTER.
3.1.- Once you press ENTER the scale will show the network name so
that you can connect to it by a mobile device or pc.
3.1.1.- The visible network for mobile devices and pc(wirelessly) will start
with the words SCALE_LINK_ followed by a unique alphanumeric code.
It is recommended not to alter this code.
Using the arrow keys, you can move around the digits, and replace a
digit with the numeric pad.
To erase a digit, press the DEL key or the C key once finished editing the network name
press ENTER and it will show NETWORK PASSWORD.
