- 31 -
3.1.- When choosing DYNAMIC IP the scale configures automatically the
necesary parameters for it to work dinamically on the scale.
3.1.1.-Once done
3.1.2.-The scale will
It will show reboot
by itself
***READY**
and go into
CONFIGURATION.
3.2.- When choosing STATIC IP, it should assign it’s IP automatically, it’ll
show the message Type IP
3.2.1.- By default the IP address is 192.168.106.20
with the arrow keys you can move around it’s
address and modify it.
To erase a digit press the DEL key or the C key, once finished editing the ip address press ENTER, then
it will show the message Type in Network Mask.
3.2.2-.By
default
the
network
mask
is
255.255.255.0 using the arrow keys you can move
around the digits, you will notice your current
position due to the digit blinking when selected,
you can replace the digit with a different one with
the number pad. To erase a digit use the DEL key
or the C key, once finished editing the network mask press ENTER, it will show a message TYPE
GATEWAY.
3.2.3-.By default the gateway is 192.168.106.1 you
can move around the digits using the arrow keys,
you will notice your current position on the digits
due to the certain digit blinkingyou can replace that
digit using the numbers pad. To erase a digit use the
DEL key or the C key, once finished editing press
ENTER, then it will show the following messages:
WAIT SAVING IP. IP UPDATED. RESTARTING.
Summary of Contents for W-LABEL 40L
Page 1: ...TORREY SCALES W LABEL SERIES USER MANUAL Rev 0...
Page 4: ...4...
