SETTING TIMER
The timer is a count down timer that reads in hours, minutes, and seconds
continuously. It can be set to 59 hours, 59 minutes and 59 seconds maximum. When
the timer counts down to zero, it will sound an audible alarm for one minute. When the
alarm starts to sound, the unit will then count up so that the user may see how long it
has been since the alarm timed out. The audible alarm can be turned off after it has
sounded by depressing the UP or DOWN ARROW.
When the timer is set, the display will show the timer value in hours, minutes, and
seconds on the bottom line of the display. The top line of the display will now show the
SET POINT as SP and then the value as set and the display will show the PLATE
TEMP as PL and the actual plate temperature. The other timer options under TIMER
OPTIONS are AUTO-OFF, STOP TIMER and BEEP.
See Figure 2 and Figure 3 for more details on how to set, start, and stop the timer.
Figure 4 shows how to select from the various Timer Options.
Figure 2:
Menu Map to Set and Start the Timer
Torrey Pines Scientific, Inc.
10
