Torque XCREATE-CCHWM, Assembly Instructions Manual

Page: 2 / 29

50 180
3
190 150 170 160
6
130 140 120 90 110 100 40 30 10 70 60 20 80
1 2 4 5 7
200
ITEM PART NUMBER DESCRIPTION QTY
1 56641PA PTD ASSY, LOWER WALL MOUNT 1
2 5642701 WLDMT, WEIGHT STACK BASE 1
3 2001301 WASHER, FLAT 1/2 SAE ST ZN 4
4 2006803 BOLT, 1/2-13 X 1" (25mm) SOCKET HEAD W/NP 4
5 2001101 WASHER, FLAT 3/8 SAE ST ZN 11
6 5643201 GUIDE ROD, 19 DIA X 1912 2
7 5513601 CUSHION, WEIGHT STACK 2
8 56350PA PTD ASSY, 15 LB WEIGHT PLATE 10
9 56349PA PTD ASSY, 10 LB WEIGHT PLATE 5
10 56351PA PTD ASSY, 20 LB WEIGHT PLATE 15
11 56435PA PTD ASSY, HEAD PLATE 1
12 5095301 SHAFT COLLAR, GUIDE ROD 2
13 5667301 BUSHING, GUIDE ROD RETAINER 2
14 5644001 TUBE, SLIDE UPRIGHT 1
15 5661701 ASSY, CARRIAGE 1
16 5672101 BUMPER, CARRIAGE STOP 1
17 2008409 BOLT, 3/8-16 X 2-1/2" (64mm) ST HT SOCKET HEAD 2
18 2001201 NUT, 3/8-16 LK ST ZN 3
19 5664401 WLDMT, UPPER WALL MOUNT 1
20 56445PA PTD ASSY, TOP BOOM 1
21 2009418 BOLT, 3/8-16 X 4-3/4" (121mm) ST HT SOCKET HEAD W/NP 2
22 5094501 PULLEY, 4-1/2 OD X 25 1
23 5669001 COVER, 4.5 PULLEY 1
24 2008407 BOLT, 3/8-16 X 2" (51mm) ST HT SOCKET HEAD 1
25 5645001 CABLE ASSY, XCREATE CABLE COMPONENT 1
26 5508801 HOUSING, CABLE COUPLER 2
27 5508901 GROMMET, RUBBER CABLE 2
28 5509001 CORE, CABLE COUPLER 2
29 2003201 CAP SCREW, M5 X 0.8 X 6MM SOCKET HEAD 4
30 5675401 LABEL, WEIGHT STACK 10-110 LB (4.9-49.9 KG) 1
31 5675501 LABEL, WEIGHT STACK 10-160 LB (4.5-72.6 KG) 1
32 5662501 WLDMT, LEFT SHROUD BASE 1
33 2009402 BOLT, 3/8-16 X 3/4" (19mm) ST HT SOCKET HEAD W/NP 4
34 5662901 WLDMT, RIGHT SHROUD BASE 1
35 5645101 SHROUD, XCREATE CABLE STATION 2
36 5664701 SHROUD, TOP CAP 1
37 2002101 WASHER, FLAT 1/4 SAE ST ZN 8
38 2006502 BOLT, 1/4-20 X 1/2" (13mm) SOCKET HEAD W/NP 6
ITEM PART NUMBER DESCRIPTION QTY
39 5676101 PLACARD, XCREATE-CC-101 1
40 5581301 COVER, FRONT BASE 1
41 2005509 BOLT, 1/4-20 X 3/8" (9mm) SOCKET HEAD 2
42 5659601 WLDMT, ACCESSORY HOLDER 4
43 5091801 SNAP HOOK, 8MM DIA X 80MM 2
44 5324701-A ASSY, SHORT STRAP HANDLE 2
45 5324601-A ASSY, LEG BOOT D-RING 1
46 5676401 ROPE, SINGLE HAND TRICEPS 2
NOTE:
Anchoring hardware is dictated by the wall construction that the station
is being attached to. See pages 4 and 14 for the requirements.
If multiple stations are going to be attached to the same wall, a minimum
of 4' (2.4 M) center to center is recommended between stations.
For assistance, contact www.sales@torquefitness.com or call
(763) 754-7533; Toll free in USA (877) 867-7854.
TOOLS FOR ASSEMBLY:
3/8" ALLEN WRENCH •
5/16" ALLEN WRENCH •
3/16" ALLEN WRENCH •
3/4" WRENCH OR SOCKET •
9/16" WRENCH OR SOCKET •
1/2" WRENCH OR SOCKET •
RUBBER MALLET •
2