NOTE:
TO REMOVE SHROUD,
LOOSEN AND REMOVE
6 SCREWS AS SHOWN
BOTTOM VIEW
11
INSPECTION & LUBRICATION
INSPECTION:
ATTENTION:
PLEASE ENSURE THAT ALL TIRES ARE INFLATED
TO 30 PSI. FAILURE TO DO SO MAY RESULT IN
TANK VEERING DURING USE.
Once a month, check for loose bolts on frame and
wheels. Tighten if necessary.
Once a month, remove shroud and check that the
chain and sprockets are clean, free of rust, dust
and grime. Make sure that the chain is properly
lubricated.
LUBRICATION:
Once a month, the sprockets should be cleaned and
the chain should be lubricated.
RECOMMENDED LUBRICATION: Use a Dry lubrication
for indoor use, and wet lubrication for outdoor use.
Most bicycle shops carry a variety of different
lubricants and can recommend a lubricant based on
the conditions where the TANK will be used.
